Hi all,
I have just purchased a brand new 13 pin wiring kit from Nissan (KE505JD113) to fit to my 60 plate +2.
The wiring kit is simple enough, one large plug + earth + a loose wire I believe is for fog lights.
Got it all set up per the instructions, and the only lights that work are the indicators.
no side lights, no brakes, etc.
If I put the fog lights on, the fog light on the board comes on, along with one side light.
I have double checked the wiring of the trailer board (its brand new) and also tested it with a 12v source and every light works correctly per the pinout.
Last time I tested with a multi-meter on the wiring kits plug, I could not find any 12V for tail lights or brakes when the pedal is pushed. It's almost as if there is no power for the lights. Possibly a fuse or something worse?
I have returned the first one, and a second brand new kit does the same thing.
Any ideas? Been driving me mad for weeks now.
New trailer wiring not working correctly
-
- Posts: 1
- Joined: Thu May 18, 2017 10:12 am
I have exactly the same issue, did you ever find a solution?
Many thanks
Many thanks
-
- Posts: 3
- Joined: Thu Feb 16, 2017 9:22 am
It was the fuse. it was called "dealer option" or something not directly indicative of being for a trailer.
-
- Posts: 3
- Joined: Thu Feb 16, 2017 9:22 am
Don’t have the car anymore. Just look under the steering wheel and make sure every slot is occupied and has a working fuse.
They are all labelled so above should be enough info.
They are all labelled so above should be enough info.