yer the Garage will move the sensor over to the new tyre the only thing you need to check is the PSI and tell them as normally they will stick what they think they want it should say the tyre pressures on the driver side door

I Have a Dasaita fitted in mine bought off amazon contact them if you are unsure which one you need , and it works perfectly the only down side is the one i have there is no button so you have to have it hovering on the screen and press it when you want to bring the cameras up but am working on that...

Yer mine don't come out they all go in one point at the top I will try take a pic see if am just being dumb haha

Don't think you have read my text I have searched and it says to connect to the bulbs but mine ate sealed you cannot turn them out hence why I have asked the question!

Hi guys I have been looking at the guides and not had much luck I was trying to connect a drl strip to the lights and indicator. I got a drl controller which didn't seem to turn off even after 10 minutes of the engine being off, I then had a proper look at the light to see if I can remove the bulb b...

Not sure of the type you have ordered, but those that I purchased looked like this: 31154AAE-A7C0-4CDE-B69D-F05B20F97F51.jpeg So these already come with a Controller in the black box. So the three wires I mentioned: Yellow & Black go to the original indicator wires locally for indicator functio...

I ordered this with a drl controller to connect up to the battery but I can't get it to turn off the controller said under 13v will power off but my volt meter is reading 12.01v but still not powering down any ideas? Am new at this and thought it might be easier to connect using a controller or am I...

These ultra thin DRL dynamic indicators come with three wires on each strip. For the indicating function then I simply connected these two wires locally at each original bulb location and tapped into original wires. To get the DRL function as well then took a common feed from the engine bay fuse bo...

does anyone have a guide after speaking to alot of fitters they wont touch it because I want to get the 360 camera working ? so it looks like it will be a DIY job if anyone has good video or a quick refence guide as the amazon link says it doesn't come with one

am looking to install these on mine did you connect the wires up near the original ones going to the wires or closer to the fuse been looking at guides and some do it one way and others do it near the fuse so looking for some advice?