Bod wrote: ↑Sun Jan 29, 2023 6:23 pm Hi there. I'm having the same issue. May I ask what relay you are talking about and the location of it.

Many thanks

Bod

Hi. It's the fuse panel inside the car. There are two blue fuses. It's the one on the right. I believe the diagram lists it as R2.
It was extremely tight to get it out.

I thought I'd post back and say I solved this. It was the relay after.
The annoying thing is I removed it and tested that it clicked which it did, but I didn't test that it actually worked. A mistake that cost me loads of time. Got there in the end though.

Buffy wrote: ↑Wed Jan 11, 2023 5:07 pmFuse ?

Fuses are both good.

Maybe a stupid question but how do I get the relay out. Its stuck solid by the fuses. Does it clip in?

My problem remain the same. I've removed the blower motor and tested its working. The resistor seems to test OK as best I can tell. Both fuses are good. I have tested for power to the blower motor and resistor but there is no power at all. I wondered if the relay was bad but I can't seem to unplug i...

QashqaiSilver wrote: ↑Mon Dec 19, 2022 1:44 pm Could be the blower motor resistor gone

Thanks, I'll look in to this!

I have a +2 2013 j10. The other morning the heater blowers won't work. The climate control panel lights up as normal and I can hear the a/c pump engage if I press the button but no air blow at all. I checked 2 fuses and both are fine. I suspect the relay but I'm not sure how I would test it, and I'm...

I did mean to reply back about this. Terraclean worked for me.... My fault was caused by the dpf being clogged and not clearing itself. I paid for someone to do a manual clean of the dpf and while doing this they noticed that the pipe where they would usually pump the chemicals in to the dpf had a s...

Hi. Did you find a solution please.

I have a similar issue but I way to avoid buying a new dpf if I can.

I'm hoping someone can help. I have a Qashqai 1.6 DCI and on the dashboard I'm seeing stop start fault and the engine light. Cruise control and speed limiter no longer work. There is also a dip in power around 2000 RPM. Other than that it drives ok. These are the fault codes from my local garage. P2...