https://disk.yandex.com/i/a66CM_NAkMQQcw

The Sinosmart guys from AliExpress provided this piece of instruction for my unit, thought it might be useful to folks with similar problems.

This is how it’s connected currently, and I don’t have a connector that fits your description, at least not the way I understood it. If you mean the upper left as in the black power connector, than as far as I can see it’s got a video wire going to the CANBUS connector. The CAM and CAM VIN are conne...

In your case with Sinosmart you must connect the cable with the label camera to the yellow cable connected the upper left connector if you view it from the back of the unit. Do not disconnect the canbus box because the box detects reverse and also controls your SWC volume. Hey, thanks for the reply...

Hi all, I've read through this thread however I'm not sure which cables or pins to swap to get the reverse camera working on my J11 2014. I've got the NS-SS-04 canbus and tried plugging in the yellow RCA cable into all the available female ports however it just switches to a blank screen when putti...

If you enabled it in the settings as described above, just cycle through available screens with the left-hand switch on the wheel and it should be there.

I've just got a letter from my dealer (mind you, I live in Serbia, but can't imagine support here being better than in the UK) informing me that the ECM update is in order for a potential issue with rear oxygen sensor... I'd say this piece of information dashes all hope regarding possible performanc...