Thanks, yes I realised once checking them closer that inner and outer rears are shaped differently. Luckily I found the right one I needed on eBay eventually.

Hi

Does anyone know if the front and rear sensor covers on a J11 are the same? I note they have different part numbers (28533-4EA9A and 28533-4EA3A) but was wondering if a front one could be used on a rear sensor. I need one for the rear and they are quite scarce.

Regards
Nick

So had a fiddle tonight and half-sorted it. I did a test with a lead spliced off the battery wire and it fired up straight-away. I tried to trouble-shoot the issue with the ACC lead but struggled to get my multi-meter into the Qashqai ISO harness on the supposed ACC wire - I may have to resort to cu...

Thanks will have a go this evening.

Thanks Nomader - will crack on with fuses then - not sure where else to check though - yanked most of the ones in the glove box and they all look fine. I am starting to wonder if in all the connecting/disconnecting I might have bent a pin on a plug so will check them too. I suppose as a test to conf...

Bit of a long story but I was fixing the issue with the reverse camera not working in my J11 with this unit - turns out the ISO connector was not sending anything to the original camera on signal and ground wires - I solved this by splicing the camera on signal with the reverse signal lead and conne...

Hey all, any ideas what I’m doing wrong? Hi, I also got the error message that says "please use NissanConnect software download image only", any idea why? My stick USB is formatted Fat32 and I had the same folder structure in it as per the photo earlier in this thread and followed the ins...