THanks, FIXED - apparently a few loose bolts. after 2 mechanics test drove and aggreed it would be a wheel bearing, they unscrew the wheel, which came off a bit too easy. So tightened back on, and all was good! finally a cheap fix

Hi Guys, ISSUE: When testing pressure on DPF I get negative pressure on acceleration and plus when decellerating. - If tops around 3000 rpm, and then engine light comes on, goes to limp mode. After about a week, and 3 different mechanics, and 2 new "Exhaust pressure sensors" (OE: 820097442...

Hi guys, Yesterday, driving on Polish bumpy road, I suddenly get a new terrible noise, the noise only appears when de-acceleration, it sounds like a bearing, and first I thought of the driveshaft, but it might also be the 3-way bearing inside (not sure of the real name for this joint, where drive sh...

Did you ever get this fixed? I have similar sound, but from a 2 wheel drive, and noise is on front right wheel.

Hi guys, Yesterday, driving on Polish bumpy road, I suddenly get a new terrible noise, the noise only appears when de-acceleration, it sounds like a bearing, and first I thought of the driveshaft, but it might also be the 3-way bearing inside (not sure of the real name for this joint, where drive sh...

Hi guys, I am at 149.000km and time for cam belt exchange is coming up. In Denmark they mention Polybelt, waterpump and camshaft belt. 800€ In Germany they only change camshaft belt. 450€ In Poland they mention waterpump and camshaft belt 1700zl = 410€ + Polybelt = 430€ All are Nissan dealers and wo...

I see I missed a few post - however seems like the bike cable is the fix nice - BUT where does all the soot end up I am wondering?

Hi guys, Any one got closer to this issue fixed? - I was thinking about Bell ad engine cleaner, but not sure if it will clean that part of the engine.. seems like a multiple cause problem? I had a small fault on on gluw plug long time ago, when nissan had it in for service, I said they should leave ...

Hi guys, Any one got closer to this issue fixed? - I was thinking about Bell ad engine cleaner, but not sure if it will clean that part of the engine.. seems like a multiple cause problem? I had a small fault on on gluw plug long time ago, when nissan had it in for service, I said they should leave ...

Is it not possible just the hold down the Handbrake button when turning of the engine, then the brake is NOT pulled and you can change rear brake with out any issues? and pads.