Search found 2719 matches
- Wed Oct 26, 2022 11:41 am
- Forum: Electronic systems
- Topic: Dashboard Display is Black
- Replies: 7
- Views: 2463
Re: Dashboard Display is Black
Hi, I replaced my battery, and since then the display screen between the odometers has been black. Anyone know how to get it back? There are fuse boxes on both the front cabin left and right side (pax and driver region) panels. The doors cover them when closed near the hinge points. The panels are ...
- Tue Oct 25, 2022 1:41 pm
- Forum: Engine & Drivetrain
- Topic: Nissan Qashqai 1.5dci throttle body relearn?
- Replies: 6
- Views: 3057
Re: Nissan Qashqai 1.5dci throttle body relearn?
Hi thanks for your help P2111 fault is throttle actuator stuck open but it cant be as car runs/idles perfect have swapped throttle body and throttle position sensor can I ask what software you use to go into these Qashqai I use a generic scanner as yourself. I went to a local ATS Euromaster garage ...
- Tue Oct 25, 2022 12:14 pm
- Forum: Engine & Drivetrain
- Topic: Nissan Qashqai 1.5dci throttle body relearn?
- Replies: 6
- Views: 3057
Re: Nissan Qashqai 1.5dci throttle body relearn?
Those Codes are not in Nissan diagnostics for for the K9K engine.
However, P0120 is for throttle position sensor and P2119 is Electric throttle control actuator
Likely both of those will initiate Stop/Start disable
Not very helpful
However, P0120 is for throttle position sensor and P2119 is Electric throttle control actuator
Likely both of those will initiate Stop/Start disable
Not very helpful
- Mon Oct 24, 2022 1:30 pm
- Forum: General
- Topic: abs light and traction control light
- Replies: 7
- Views: 1862
Re: abs light and traction control light
hi guys new to the forum and this has probably being posted somewhere on the site basically both my abs and traction control lights are on and unsure why i have put obd on it to read codes and i get p0530 and p0380 first one being pressure sensor of ac refrigerant is out of range and the second cod...
- Sat Oct 22, 2022 8:39 am
- Forum: General
- Topic: abs light and traction control light
- Replies: 7
- Views: 1862
Re: abs light and traction control light
hi guys new to the forum and this has probably being posted somewhere on the site basically both my abs and traction control lights are on and unsure why i have put obd on it to read codes and i get p0530 and p0380 first one being pressure sensor of ac refrigerant is out of range and the second cod...
- Thu Oct 20, 2022 7:48 am
- Forum: General
- Topic: Stop/Start System Fault
- Replies: 11
- Views: 10068
Re: Stop/Start System Fault
Difficult to be accurate really. From your pics I think I would look closely at the tyre pressure fault first and eliminate that. You should check all tyre pressures with a tyre pressure gauge. Make sure they are correct. Thats a safety issue for one. The other faults are present probably because of...
- Wed Oct 19, 2022 1:28 pm
- Forum: General
- Topic: Stop/Start System Fault
- Replies: 11
- Views: 10068
Re: Stop/Start System Fault
Calnorth, you were correct the fault codes came back, however, I did notice when connecting my scanner that there are 2 ecu's. The first showed no faults, the second showed 2 which unfortunately I erased before reading them oops. No doubt they will reappear so will read the then. But, 2 ecu's? .......
- Mon Oct 17, 2022 10:48 am
- Forum: Electronic systems
- Topic: Hardwiring thinkware dash cam
- Replies: 3
- Views: 814
Re: Hardwiring thinkware dash cam
BCM is not a good place to go...its a very, very expensive unit and no diagrams exist for it..including wiring. I also connected to the wiper supply..(passenger side fuse box). Need to remove glove box and side covers. That is a fuse piggy back job and ensures power off when ignition off. Leaving a ...
- Mon Oct 17, 2022 7:28 am
- Forum: General
- Topic: Stop/Start System Fault
- Replies: 11
- Views: 10068
Re: Stop/Start System Fault
Update, cleared the DTC from the ECU and all is now working normal again, must have been a glitch but I will keep my eye on it. Errors can return because the ECU continually checks for faults and counts any such occurrences over time. It often takes about 3 cycles or starts of the engine to finally...
- Sat Oct 15, 2022 12:31 pm
- Forum: General
- Topic: Stop/Start System Fault
- Replies: 11
- Views: 10068