Search found 214 matches
- Mon Jan 28, 2019 9:15 pm
- Forum: Electronic systems
- Topic: Dipped near side headlight failed
- Replies: 10
- Views: 6059
Re: Dipped near side headlight failed
Terry64, Had a look today, removed the nearside, proposing to change them for a check, but could not remove the offside bulb. Replaced the nearside and made sure that the connecting pin was in the correct way and the damn thing worked. The connector has 4 pins with pin #2 missing, so it should only...
- Mon Jan 28, 2019 8:11 pm
- Forum: Electronic systems
- Topic: cruise control / horn
- Replies: 6
- Views: 4855
Re: cruise control / horn
Might be: Clockspring From Wikipedia, the free encyclopedia Clocksprings generally consist of a flat multicore cable wound in a spiral shape similar to a clock spring, hence the name,[1] but the name is also given to devices fulfilling the same purpose but which use spring-loaded brushes contacting...
- Mon Jan 28, 2019 7:29 pm
- Forum: Electronic systems
- Topic: Fog lamp lense smashed
- Replies: 10
- Views: 4810
Re: Fog lamp lense smashed
- Sun Jan 27, 2019 6:27 pm
- Forum: Electronic systems
- Topic: Fog lamp lense smashed
- Replies: 10
- Views: 4810
Re: Fog lamp lense smashed
Not changed mine to LED but have seen some for sale on aliexpress, but as I have not tried them can not say if they are any good. I have also seen more expensive ones but can not remember where I was looking at changing to these LED fog +DRL in one lamp, they look identical fitting as the originals ...
- Sun Jan 27, 2019 6:24 pm
- Forum: Electronic systems
- Topic: cruise control / horn
- Replies: 6
- Views: 4855
Re: cruise control / horn
Sounds like the wiring loom in the steering wheel area, could be a loose plug, that is where I would be looking at.
- Sun Jan 27, 2019 5:26 pm
- Forum: Engine & Drivetrain
- Topic: Turbo blown & engine damage
- Replies: 12
- Views: 8272
Re: Turbo blown & engine damage
Thanks Terry64. I will try the dealer that’s looked after the car since new and Nissan Cust Servs but I don’t hold much hope. When it blew everything happened so quick but it was straightforward - a very high pitched whistle, loss of power, red engine light on and I literally coasted 200yrds down h...
- Sun Jan 27, 2019 10:22 am
- Forum: Engine & Drivetrain
- Topic: Turbo blown & engine damage
- Replies: 12
- Views: 8272
Re: Turbo blown & engine damage
I do not see how it has cooked the engine if you checked the oil and it was full, and you pulled over as soon as the turbo went, I drove a merc for miles with out the turbo, the vehicle went into limp mode as soon as turbo went, It did no other damage to the engine. But I only got an orange warning ...
- Sat Jan 26, 2019 11:14 pm
- Forum: Electronic systems
- Topic: Dipped near side headlight failed
- Replies: 10
- Views: 6059
Re: Dipped near side headlight failed
You put the bulb that did not work in the other side and it worked, Have you tried putting the working bulb in the side where it stopped working to see if it comes on. You also mention it came on after a drive and went back out. It could be the bulb has blown but when you move it the tungsten filame...
- Fri Jan 25, 2019 9:50 pm
- Forum: Engine & Drivetrain
- Topic: 2016 Techna 1.5 Diesel - Clutch issue
- Replies: 3
- Views: 1644
Re: 2016 Techna 1.5 Diesel - Clutch issue
Hi All I am a newbie and I can see comments about clutch issues on the forum but I am looking to see if anyone has had anything similar and had a result with Nissan UK and/or the dealership? Synopsis: -26,000 leased and 2yrs 10 months old. -Felt like car was over revving and took it to Nissan Birmi...
- Thu Jan 24, 2019 5:05 pm
- Forum: Chassis, Wheels & Tyres
- Topic: Front Brake Pads - Sensors?
- Replies: 16
- Views: 11736
Re: Front Brake Pads - Sensors?
Just searched a bit more. I found this response: "You don't need any pc software to pull pistons back. Just take off the brake motor from caliber and turn motor coupling with t40 torx CCW. This will back up mechanism. Now you can use the old-style press to press the piston back in." Now t...