The wiper motor is controlled by the ipdm which is located in the engine room, its the fuse box on the right that is usually upside down. The relay is build in to the old for the wiper motor, aslong as you know that the motor fitted is okay by the sounds of it all it can be is either wiring to the m...

When you try to lock it are you sure it only beeps once? Or does it Veep 4 times?

On the dash it should say if a door or boot lid is still open the only thing it doesn't show is bonnet. Sometimes adjusting the bonnet switch by bending the bracket up a bit sorts it

The timing tool that is used to lock the crank when timing it up is used when tightening crank pulley. 120nm torque is easily done with torque wrench but the next 100 degrees is where it gets difficult, easier to mark the head of the bolt then mark the pulley 100 degrees clockwise then using an impa...

You can only find sw level on j12 AIVI 3.1 in the diagnostic menu not in settings Latest sw level is 5350 And latest update fixes are for Apple car play, rebooting blank screen, AVM freeze whilst reversing, bluetooth/wifi connection, no function in cold temperature, and some addresses not working in...

Interesting Bit of new information for you all, have you seen the new j12, F16 hybrid and FE0 ariya ikeys? They now have a motion detecting sensor inside of them so if they haven't been moved for something like 20 minutes they will go to sleep and not respond to any requests until they have been &qu...

The exhaust flap is only there for low pressure egr, so majority of time you won't see it work as low pressure egr flow happens as your driving it can start if let idle for sometime but your best of using a bi directional scan tool to actuate it and visually look at it move. That flap actuator has b...

Send in a picture of the plug, nissan dealers have a harness repair kit and contain most of the connector and pins on the loom for repair

You don't need it paired as such but the ipdm/emcm does require the battery data clearing so it then know it need to carry out a calibration on the new battery so as to work out State of health and state of charge ect. A full code scan will be more beneficial to begin with before making any assumpti...

I'm way down in West Wales, not sure on price as it varys so much depending on hourly rates, your talking around 6 hours to do it so if your talking dealer prices its 540 plus vat just for labour and then there's parts on top of that .....

Common problem with r9m mate, I have done loads, easier job than the 1.2 dig t ... but I recommend a new timing cover as it usually bends upon removal unlike the aluminium covers which don't bend. Easy enough to do though just recommend putting on the genuine nissan sealant and you'll need 2 tubes o...