Hi all
I have a 69 plate Qashqai and it looks like they have changed the harness for the dedicated towbar electrics from mid 2019.
I have the Yaeger control module from the previous harness level, does anyone know if the controller will work on the new vehicle if I get the right feed from the service plug on the D post.
Or does anyone know the wiring diagram for the plug on the Jaeger 321164 module.
I have attached a photo of the controller.
Thanks For any help
Paul
Towbar electrics
-
calnorth
- Posts: 2719
- Joined: Mon Feb 11, 2019 2:01 pm
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
This eBay listing shows Qashqai J11B 2017-Onwards and is your Jaeger 321164 module with NISSAN document
"Genuine Nissan Qashqai J11 / J11B 7 Pin Towbar Electric Wiring Kit KE5054E207......PLEASE FEEL FREE TO ASK ANY QUESTION'S"
https://www.ebay.com/itm/Genuine-Nissan ... 3896484993
Don't think any circuit diagrams have ever been published.
"Genuine Nissan Qashqai J11 / J11B 7 Pin Towbar Electric Wiring Kit KE5054E207......PLEASE FEEL FREE TO ASK ANY QUESTION'S"
https://www.ebay.com/itm/Genuine-Nissan ... 3896484993
Don't think any circuit diagrams have ever been published.
Mk2 Qashqai Facelift - J11b (2017–and onward)
1.6 Dig-T N-Connecta
1.6 Dig-T N-Connecta
-
MrB36
- Posts: 2
- Joined: Sat Feb 29, 2020 7:58 pm
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
I have a similar question.
I have a mid 2019 Tekna, it seems I need the trailer module/harness (KE5054E207) But I can't figure out where it plugs in. I have stripped the rear nearside of the boot and there are no spare connectors. There is a male/female white connector directly above the wheel arch that carries permanent feed and indicator signals. Do I need another adaptor/patch loom to break into the harness at this point?
Any suggestions or help would be very much appreciated.
I have a mid 2019 Tekna, it seems I need the trailer module/harness (KE5054E207) But I can't figure out where it plugs in. I have stripped the rear nearside of the boot and there are no spare connectors. There is a male/female white connector directly above the wheel arch that carries permanent feed and indicator signals. Do I need another adaptor/patch loom to break into the harness at this point?
Any suggestions or help would be very much appreciated.
-
MrB36
- Posts: 2
- Joined: Sat Feb 29, 2020 7:58 pm
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
I have a similar question.
I have a mid 2019 Tekna, it seems I need the trailer module/harness (KE5054E207) But I can't figure out where it plugs in. I have stripped the rear nearside of the boot and there are no spare connectors. There is a male/female white connector directly above the wheel arch that carries permanent feed and indicator signals. Do I need another adaptor/patch loom to break into the harness at this point?
Any suggestions or help would be very much appreciated.
I have a mid 2019 Tekna, it seems I need the trailer module/harness (KE5054E207) But I can't figure out where it plugs in. I have stripped the rear nearside of the boot and there are no spare connectors. There is a male/female white connector directly above the wheel arch that carries permanent feed and indicator signals. Do I need another adaptor/patch loom to break into the harness at this point?
Any suggestions or help would be very much appreciated.
