Hi all,
I am wondering If you could help me withe the issue I have found with my Qashqai?
It is 1.6 petrol, 2011 tekna. The car was recently serviced (cabin filter replaced). I just noticed that when I use an air con I can only get a cold air once the controller is set to βLOβ. When I change the temperature to 16-16.5deg the air becomes much warmer than this. I stripped down all the heater actuator to make sure that it has been installed corectly, and it was. I followad vides from links I have found on this forum. I noticed that when the temperature is set to LO, the flap is at its lowest position, as soon as I change the temperature by 0,5deg the actuator moves the flap all way up.
Could you please tell if this is normal? To me this actuator should move the flap gradually in between its minimum and maximum stroke and it should only reach top position at HI temperature setting, no at 16.5 deg.
Is this a sign of faulty Heater actuator? Or there is something else wrong?
Thanks in advance
Heater actuator
- gloucester
- Posts: 5173
- Joined: Sun Apr 03, 2016 7:04 am
- Location: Gloucestershire, England
- Qashqai Model: Mk.2 Qashqai - J11 (2013β2017)
Welcome to this forum
For those requesting the video links please note that the poster was last active: "Sun Sep 22, 2019 6:44 pm"
You'll have to search.
For those requesting the video links please note that the poster was last active: "Sun Sep 22, 2019 6:44 pm"
You'll have to search.
(2015 Nissan Qashqai Tekna DIG-T 1.2 sold 15/6/18) ~ 2018 Suzuki Ignis SZ5 - 2018 Yamaha MT-07 ~ (2024 Volvo EX30 ordered)