Page 1 of 1

1.5 DCI Limp mode

Posted: Wed Nov 27, 2019 11:55 am
by MCCARROLL_FORCE
Hello all,
Hoping somebody can help me with the below as I'm pulling my hair out at this point!

My 12 plate 1.5 DCI J10's Air intake pipe split about a week ago I was on the motorway at the time and noticed the car was rapidly losing power and slowing down. I got off at the next junction close to my home and managed to limp it back I bought a replacement intake and fitted it however I now can't get the car above 1500rpm even after resetting the fault codes. I dropped it off at a Wilco Motorsave garage to be worked on they replaced the EGR DPF and a turbo solonoid? Having done that the only code they are still getting is ASCD fault but the mechanic has now given up on it & suggests it may need a main dealer. Please can anyone shed some light on this or point me in the right direction.

Below is the list of codes I had before the mechanic carried out the repairs.

P012C (Inlet pressure)
P242F (DPF)
P0299 (turbo underboost)
P047B (exhaust pressure B)
P0471 (exhaust pressure)

P1525 ASCD Air bypass valve/Auto speed control device

They have checked the brake lights work (ASCD pedal switch).

Re: 1.5 DCI Limp mode

Posted: Wed Nov 27, 2019 5:34 pm
by gloucester
Welcome to this forum.

I see you've also been discussing this at https://www.qashqaiforums.co.uk/viewtopic.php?f=18&t=2441

I can't add anything I'm afraid.