Nissan quashqai 2012

General Chat about the Mk1 QashQai
Post Reply
Moggy4
Posts: 3
Joined: Sun Jun 28, 2020 11:39 am
Qashqai Model: Mk.1 Qashqai Facelift - J10b (2010–2013)

Nissan quashqai 2012

Post by Moggy4 » Sun Jun 28, 2020 8:25 pm

Hi
I am looking for some advice regarding a spare space saver wheel for my nissan quashqai tekna 2012 with 18 inch tyres on it.
I have been offered a quashqai Spare space Saver 145/90 R16. But I am not sure if it will be suitable for my car.
Any advice would be much appreciated

User avatar
gloucester
Posts: 2308
Joined: Sun Apr 03, 2016 7:04 am
Location: Gloucestershire, England
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Re: Nissan quashqai 2012

Post by gloucester » Sun Jun 28, 2020 8:55 pm

Welcome to this forum

Any Qashqai spare wheel will fit any Qashqai. All Qashqai spares are either 16" or 17" - but they have higher profile tyres to match the rolling diameter of the fitted wheels.

Remember you need a jack and wheelbrace too - and preferably the correct foam fitments to house them all.
(2015 Nissan Qashqai Tekna DIG-T 1.2 sold 15/6/18) ~ 2018 Suzuki Ignis SZ5 - 2018 Yamaha MT-07

DaveBerlin
Posts: 7082
Joined: Wed Mar 19, 2014 12:39 pm
Location: Berlin, Germany
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–present)

Re: Nissan quashqai 2012

Post by DaveBerlin » Sun Jun 28, 2020 9:59 pm

Moggy4, firstly welcome to the Forum. There has recently been a similar post (see attached) or use the “Search” which is full of facts on Spare Wheels, Sizes etc put together over the years. We have a 16” Wheel Kit which we originally put together with our Nissan Dealer using QQ J10 Parts and was in our QQ J11A and now in the J11B - Dave 😃

viewtopic.php?f=20&t=9817#p76985
11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken

Spuriousfish
Posts: 39
Joined: Tue Jul 05, 2016 12:25 pm

Re: Nissan quashqai 2012

Post by Spuriousfish » Mon Jun 29, 2020 8:49 am

For my 2012 I got one online from The Wheel Shop. https://www.thewheelshop.co.uk/

Its a 16 inch wheel complete with jack and wrench and fits in the space intended for it in the boot. The only thing you need to watch out for is the lifting height of the jack. Its too low to completely free the wheel from the ground so you may need something to place under it. Alternatively buy the wheel seperately and get a different jack that gives more lift.

Moggy4
Posts: 3
Joined: Sun Jun 28, 2020 11:39 am
Qashqai Model: Mk.1 Qashqai Facelift - J10b (2010–2013)

Re: Nissan quashqai 2012

Post by Moggy4 » Tue Jun 30, 2020 5:51 pm

THANKS for all your advice.
Managed to get 16 inch wheel Jack and tools and polystyrene for £70.
Thanks again for the info.

Post Reply