Lack of power/ failed regeneration

[Jamesfelgate]

Hi

I have a 2010 Nissan quashqui plus 2 acenta. It started having problems when trying to pull away from stationary, it had no power and the revs seemed to move up and down by itself. I kept stalling. After forcing some high revs, I would pull away and it would work ok whilst driving. I took it to a garage who did a regeneration and changed some
Glow plugs. Drove it for a few days and was fine. Now it’s happened again. Complete lack of power when pulling away and when idle, the revs moves up and down without me touching the accelerator. Please help

[Gel]

I'd go back to garage immediately so they can plug into their analyser.

[lewisbryant]

After doing a forced regen you have to do a work support procedure "after dpf regen" this clears the failed regen counter which is probably at 255 which is the maximum