Dog Guard Fixings

Non-Technical Nissan QashQai chat. Mk2, Mk3
Post Reply
AST1
Posts: 7
Joined: Thu Aug 20, 2020 2:49 pm
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by AST1 »

Hi All,.
Can anybody please advise what fixings I need to install a J11 genuine Nissan Dog guard?

Thanks

DaveBerlin
Posts: 8623
Joined: Wed Mar 19, 2014 12:39 pm
Location: Berlin, Germany
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by DaveBerlin »

AST1, if you have a genuine Nissan Dog Guard do you not have any instructions or installation parts as both the Nissan Guards mention drilling holes and normally details should be supplied or was the Guard 2nd Hand ? Hopefully a Dog Owner Member can help you or it will have to be a DIY Job - Dave 🙂

54783824-4BEA-4355-80E2-5966A6F5AC55.jpeg

D59BA296-1901-45D9-ABBF-26B80C7FC2A5.jpeg

Here is an old post but it does not mention the Fittings : viewtopic.php?t=7382
11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken
AST1
Posts: 7
Joined: Thu Aug 20, 2020 2:49 pm
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by AST1 »

Thanks Dave,

It is 2nd had.
I am comfortable with drilking the holes for the lower fixings, but struggling with the top fixings that go into the roof.

When I pop the lugs out, there is no thread and assume there must be a captive threaded insert.

If there are any friends on here with a genuine Nissan dog guard that can spare a few minutes to photo the the fixings for me it would be a massive help.
DaveBerlin
Posts: 8623
Joined: Wed Mar 19, 2014 12:39 pm
Location: Berlin, Germany
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by DaveBerlin »

AST1, I am a person that asks a lot, if you have the Nissan Dog Guard Type why not go to your friendly Nissan Dealer and ask the Parts Dept you may well be lucky and get some Part No’s. I was in our Dealers Parts Dept asking about Bike Carriers on Friday they were very helpful - Good Luck and worth a try Dave 😉
11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken
AST1
Posts: 7
Joined: Thu Aug 20, 2020 2:49 pm
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by AST1 »

Thanks again Dave, I will pop kn tomorrow and give it a go.

Ash
Alan W
Posts: 46
Joined: Sat Aug 15, 2020 7:56 pm
Location: Cheshire
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by Alan W »

Hi AST1. On an alternate site I found this topic
http://forum.qashqaiclub.co.uk/newbie-n ... c6719.html
Maybe it will help.

I got the Travall dog gaurd and centre separator off eBay for a bargain price, and these just clip behind the seats. Very easy to install. Hopefully you can get yours to work out for you, otherwise I would recommend selling and getting the Travall one.
2020 Qashqai 1.3DIG-T 160 DCT N-Tec in Pearlescent Storm White
AST1
Posts: 7
Joined: Thu Aug 20, 2020 2:49 pm
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by AST1 »

Thanks Alan,

I have sent the genuine Nissan guard back and will take your advice as the Travall looks a lot less messing around.

Kind Regards

Ash
Post Reply