Hi, what do you recommend to use to fix light scratches in the rear bumper. The scratches are from removing bags and troleys from the trunk.
I have j11b white pearl.
Thanks.
Scratches/ wax / polish
-
- Posts: 315
- Joined: Mon May 03, 2021 4:40 pm
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
I've found that Meguiars scratch x works great for light to medium depth scratches, not cheap but worked a treat on my QQ (gunmetal grey)
As with everything, test out on an inconspicuous area.
I got rid of exactly the same 'drag marks' on the bumper top surface and inside the scalloped area on all four door handles.
Also fantastic at removing scratches on the piano black plastic trim inside and out
As with everything, test out on an inconspicuous area.
I got rid of exactly the same 'drag marks' on the bumper top surface and inside the scalloped area on all four door handles.
Also fantastic at removing scratches on the piano black plastic trim inside and out
2018 Acenta 1.2 DIG-T in Gunmetal grey.
Uniroyal Rain expert 5
Bonnet lifting struts
Previous QQ 2007 1.6 petrol Acenta (102K miles)
Uniroyal Rain expert 5
Bonnet lifting struts
Previous QQ 2007 1.6 petrol Acenta (102K miles)
-
- Posts: 69
- Joined: Mon Dec 21, 2020 1:26 am
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
If they are just fine scratches to the top coat your normal T cut polish should do the job. Have you thought about a bumper edge protector, assuming the scratches are on the top edge.
The protector may hide any more serious scuffs that are deeper into the paint.
mrugby
The protector may hide any more serious scuffs that are deeper into the paint.
mrugby
-
- Posts: 119
- Joined: Wed Aug 30, 2017 9:41 am
- Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)
No point messing around the paint is soft and will scratch again, just add a plastic cover, mines been in place for 4 years now and no more scratching. From Ebay ,but can't exactly remember where from sorry.
fbgqashai 2017 J11a N Connecta 1.5DCi in Silver
-
- Posts: 3
- Joined: Sun May 09, 2021 3:47 pm
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
Thanks all.
I understang the value of the covers, but, personally, i do not like the looks. In my case the contrast is high as i have the pearl white.
I will tty the products you recommended. I was looking at meguiars but the one i looked at is dear, but comes with the polish adaptor for drill. Might be overkill
I understang the value of the covers, but, personally, i do not like the looks. In my case the contrast is high as i have the pearl white.
I will tty the products you recommended. I was looking at meguiars but the one i looked at is dear, but comes with the polish adaptor for drill. Might be overkill
-
- Posts: 8623
- Joined: Wed Mar 19, 2014 12:39 pm
- Location: Berlin, Germany
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
Larbakium, I can fully understand your comments regarding these Protectors some Like, some Dislike, a personal preference fully understood - but they do their Job.
Unfortunately it not always you that makes the Mark and it happens easy during shopping. We had a Pearlescent White J11 and installed from New a Nissan Protector St. Stl. One (no marks in 5 years), now we have the J11B Tekna + with a Black formed Protector from a German Co.
The problem with scratches is they are difficult to eliminate and you know they are there. Or it is a “Mobile Paint Doctor” Job which is not so expensive but it costs.
Another option is to buy from Amazon a length of Rubber Non Slip Matting (use this regularly) which you can cut to size and drap over the Rear Valance - No Scratches - Good Luck Dave
St.Stl. Matched the Pearlescent Color better : Same comment really Black matched the Grey better :
Unfortunately it not always you that makes the Mark and it happens easy during shopping. We had a Pearlescent White J11 and installed from New a Nissan Protector St. Stl. One (no marks in 5 years), now we have the J11B Tekna + with a Black formed Protector from a German Co.
The problem with scratches is they are difficult to eliminate and you know they are there. Or it is a “Mobile Paint Doctor” Job which is not so expensive but it costs.
Another option is to buy from Amazon a length of Rubber Non Slip Matting (use this regularly) which you can cut to size and drap over the Rear Valance - No Scratches - Good Luck Dave
St.Stl. Matched the Pearlescent Color better : Same comment really Black matched the Grey better :
11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken