Re: Wheel Well Tekna
Posted: Tue Apr 09, 2019 7:47 am
Nissan QashQai Forums
Forum for all Nissan QashQai Owners
https://www.qashqaiforums.co.uk/
Wheel Well Tekna
Page 2 of 6
Re: Wheel Well Tekna
Posted: Tue Apr 09, 2019 10:25 am
Probyan, you are great, thanks for that information that certainly appears to clear things up and I am sure our Sales Guy will be well pleased that you backed him up 
- Thanks Again Dave 
- Thanks Again Dave 
Re: Wheel Well Tekna
Posted: Tue Apr 09, 2019 10:59 am
Thanks Dave. As mentioned earlier you will see that there is no clamping bolt for the Bose as it too short. For the moment I have trapped it with a piece of carpet underlay (bottom RH corner).
I plan on getting a piece of 8mm screwed rod and making my own clamp.
I plan on getting a piece of 8mm screwed rod and making my own clamp.
Re: Wheel Well Tekna
Posted: Wed Apr 10, 2019 12:49 pm
I bought a Spacesaver wheel locally , fiited no problem, just bought some Tapped rod to fix it with. Jack wrapped in towel next to the wheel. You do lose some space under the boot floor, but worth it to carry a spare wheel.
Re: Wheel Well Tekna
Posted: Sat Apr 13, 2019 9:40 am
Had a 2016 NTEC+ and just taken delivery of a 2019 Tekna
Looking to retro fit a space saver (SS) but as advised, no room for the sub and the wheel - which from this forum is clearly not the case
Does anyone know which SS has the correct internal diameter for the sub to fit in?
As i still have both cars, it looks like the polystyrene insert is also different in the Tekna so i am going to need to get a 2016 varians as the car is on PCP and i don't want to go hacking at the 2019 variant
Looking to retro fit a space saver (SS) but as advised, no room for the sub and the wheel - which from this forum is clearly not the case
Does anyone know which SS has the correct internal diameter for the sub to fit in?
As i still have both cars, it looks like the polystyrene insert is also different in the Tekna so i am going to need to get a 2016 varians as the car is on PCP and i don't want to go hacking at the 2019 variant
Re: Wheel Well Tekna
Posted: Sat Apr 13, 2019 10:46 am
There’s only one space saver wheel/tyre available from Nissanm88rke wrote: ↑Sat Apr 13, 2019 9:40 am Had a 2016 NTEC+ and just taken delivery of a 2019 Tekna
Looking to retro fit a space saver (SS) but as advised, no room for the sub and the wheel - which from this forum is clearly not the case
Does anyone know which SS has the correct internal diameter for the sub to fit in?
As i still have both cars, it looks like the polystyrene insert is also different in the Tekna so i am going to need to get a 2016 varians as the car is on PCP and i don't want to go hacking at the 2019 variant
Re: Wheel Well Tekna
Posted: Sat Apr 13, 2019 11:33 am
thanks Mike!
In that case i can get the measurements from the 2016 i still have, cheers
In that case i can get the measurements from the 2016 i still have, cheers
Re: Wheel Well Tekna
Posted: Sun Apr 14, 2019 11:38 am
Thanks for posting the pictures, this has been useful to me.
From the pictures it looks like the you effectively lose the lower storage area (under the hard boards). Would that be a correct impression? (actually I think that is what @alans220 is saying).
From the pictures it looks like the you effectively lose the lower storage area (under the hard boards). Would that be a correct impression? (actually I think that is what @alans220 is saying).
Re: Wheel Well Tekna
Posted: Sun Apr 14, 2019 11:54 am
It is also what my earlier photo is showing.
Re: Wheel Well Tekna
Posted: Sun Apr 14, 2019 3:45 pm
Yes you do lose some, but not all of it, mainly the middle part where the sub is. Shame the sub diameter is not a little smaller so it would actually fit inside the wheel, as it is it just sits on top of it. Still worth losing a little space for the security of having a spare wheel.