Power windows

Qash758 · Post by **Qash758** » Sun Dec 29, 2019 9:25 am

Hi, I’m a new qashqai Acenta owner 2008. I am able to activate my rear power windows from the driver door however I am not able to activate them from the two back passenger doors. Can anyone help? Also I’ve tested the switches they all work

gloucester · Post by **gloucester** » Sun Dec 29, 2019 9:52 am

Welcome to this forum.

The obvious question - have you inadvertently put the child lock switch on?

If there's no change in behaviour whichever status that switch is in, it may be a corroded/loose terminal on the switch?

Qash758 · Post by **Qash758** » Sun Dec 29, 2019 12:41 pm

The child lock switch is off, I will try cleaning the terminal and see if that works. But both the back window switches are not working and they both work through the driver side door

gloucester · Post by **gloucester** » Sun Dec 29, 2019 4:09 pm

Hence my suggestion that the lock switch might be faulty. It's unlikely the two back door switches would both have failed.

General Confusion · Post by **General Confusion** » Tue Nov 10, 2020 1:33 pm

I have the same problem in reverse. I cannot lock the rear windows from the drivers position. I have tried a brand new switch unit and it has made no difference at all.

2013 J10 1.5dci 360

calnorth · Post by **calnorth** » Wed Nov 11, 2020 12:40 pm

Nissan diagnostics go as far as to say:

Change the main power/control switch unit
Check power and wiring ...bit of a difficult job without diagrams and routing.

Power windows

Nissan Qashqai Forums

Follow Nissan QashQai Forums