Renault Kajar 17, Space Saver - Will it fit?

Non-Technical Nissan QashQai chat. Mk2, Mk3
Post Reply
Mostyn
Posts: 146
Joined: Sun Jan 05, 2020 5:17 pm
Location: Wiltshire
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by Mostyn »

Hi All,
I have a chance to purchase a Renault Kajar 17,in Space Saver Spare Wheel, Jack brace and bits. Will it fit my Qashqai 2018 N-Connecta? Anyone know?
Thanks

Mostyn
Posts: 146
Joined: Sun Jan 05, 2020 5:17 pm
Location: Wiltshire
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by Mostyn »

Mostyn wrote: Fri Jan 24, 2020 12:39 pm Hi All,
I have a chance to purchase a Renault Kajar 17,in Space Saver Spare Wheel, Jack brace and bits. Will it fit my Qashqai 2018 N-Connecta? Anyone know?
Thanks
Sorted, phoned for information from parts distributor and they are the same wheel.
I'm getting a 17, inch space saver from a Kadjar , going for it tomorrow.
DaveBerlin
Posts: 8623
Joined: Wed Mar 19, 2014 12:39 pm
Location: Berlin, Germany
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by DaveBerlin »

Mostyn, you will find that the Wheel Spec Sizes are the same I suppose both Nissan & Renault being Alliance Partners. As long as the 5 Bolt PCD’s are 115,4mm and the Centre Hole is 66,1mm Dia and normally the 5 Fixing Threads for the Wheel Fixing Threads are M12 x 1,5mm then all should be OK. The confirmation you now have so it’s a Go ! - Dave 😉

Renault Kadjar :

B1E4736D-5B8D-4B06-B133-CC0863595C96.jpeg

Nissan Qashqai :

D5FB1037-DD9F-4C97-97E3-D4F7762CD6D5.jpeg

There have been recent posts on this subject of wheel sizes
11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken
User avatar
kaylan731
Posts: 46
Joined: Sat Dec 28, 2019 9:52 pm
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by kaylan731 »

Well done Mostyn, Will be good for you to have peace of mind when you are out and about in future.
Nissan Qashqai Tekna Ink Blue 2018
Turvey
Posts: 76
Joined: Sat Sep 24, 2016 11:02 am

Post by Turvey »

DaveBerlin wrote: Fri Jan 24, 2020 3:16 pm Mostyn, you will find that the Wheel Spec Sizes are the same I suppose both Nissan & Renault being Alliance Partners. As long as the 5 Bolt PCD’s are 115,4mm and the Centre Hole is 66,1mm Dia and normally the 5 Fixing Threads for the Wheel Fixing Threads are M12 x 1,5mm then all should be OK. The confirmation you now have so it’s a Go ! - Dave 😉

Renault Kadjar :
B1E4736D-5B8D-4B06-B133-CC0863595C96.jpeg
Nissan Qashqai :
D5FB1037-DD9F-4C97-97E3-D4F7762CD6D5.jpeg

There have been recent posts on this subject of wheel sizes

Shouldn't that be 5x114.3?
2010 Acenta 1.5 dci (Sold)
2016 N-connecta 1.2 dig-t (Sold)
DaveBerlin
Posts: 8623
Joined: Wed Mar 19, 2014 12:39 pm
Location: Berlin, Germany
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by DaveBerlin »

Turvey, Correct ! Whoops what do they say “a typing error”, at least the correct facts were on the attachments - Dave 😤
11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken
Mostyn
Posts: 146
Joined: Sun Jan 05, 2020 5:17 pm
Location: Wiltshire
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by Mostyn »

Well, I got the wheel and tyre, fit's the car nicely (took wheel off) tried space saver on = Perfect, also fit's in the well of the boot; although it does stand a wee bit proud, not allowing the cover to sit perfectly flat. Is that normal with a space saver? 155. 80. R17. 300 tyre size.

Image

IMG_2584.jpg

IMG_2587.JPG

DaveBerlin
Posts: 8623
Joined: Wed Mar 19, 2014 12:39 pm
Location: Berlin, Germany
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by DaveBerlin »

Mostyn, well done please take a look at this post it should answer your question - Yes ! - Dave 😉

https://www.qashqaiforums.co.uk/viewtopic.php?f=19&t=8058&start=40
11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken
Mostyn
Posts: 146
Joined: Sun Jan 05, 2020 5:17 pm
Location: Wiltshire
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by Mostyn »

DaveBerlin wrote: Sat Jan 25, 2020 10:41 pm Mostyn, well done please take a look at this post it should answer your question - Yes ! - Dave 😉

https://www.qashqaiforums.co.uk/viewtopic.php?f=19&t=8058&start=40
Yes, the link was really helpful, Dave. I've just been looking through the photos on that link; and as I said my 17, inch wheel & tyre stand a wee bit high in the well, Are those foam or polystyrene surrounds there to eliminate the slight gap either side of the tyre? and would my lower boot wheel cover still fit in if I got some of those surrounds? I assume they sit above the wheel well either side? They would probably make the lower boot wheel cover sit nicer without that wee bit of play-movement up-and-down in the cover. now I need to shop around for those wrap arounds .
Image

IMG_2587.JPG

DaveBerlin
Posts: 8623
Joined: Wed Mar 19, 2014 12:39 pm
Location: Berlin, Germany
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by DaveBerlin »

Mostyn, our QQ has the 16” Wheel Installed with the Bose Sub-Woofer which does sit high. The Foam parts were supposed to support the Flexible Floor before Spare / Emergency Wheels were Installed, but they are still very useful for retaining Tools, Emergency stuff, First Aid etc.... I would think you have the same situation and I am sure members will answer that. Our Flexible Floor does still fit but raises in the middle due to the Sub-Woofer so some space is lost. The Split 2 Section Hard Floor fits just as before - Dave 😉

Left the Tools / Right space for the Emergency stuff :

166462F3-3CEA-4616-B2F4-571F3F8015DC.jpeg

11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken
Post Reply