Page 1 of 2

Exhaust / Tail pipe

Posted: Sun Feb 23, 2020 4:00 pm
by Lusky
Good afternoon folks, just wondering if anyone has any links to, or info on tail pipes for the J11, want something nice looking but doesn't smack of boy racer. Any ideas?
TIA.
PS don't tell my missus I want to spend more money on my love :lol:

Re: Exhaust / Tail pipe

Posted: Sun Feb 23, 2020 5:07 pm
by Lusky
So I've found two. Questions are, will both fit and which one do you think? Bearing in mind my car is blue. Help please?

Car Double Square Outlets Extension Pipes Exhaust Pipe Trim Muffler Rear Tail Pipe Tip Tailpipe Car End Tipe Silver for Qashqai 2014 2015 2016 2017 2018 2019 2020 (For Car curved orginal tailpipe)

Car Double Square Outlets Extension Pipes Exhaust Pipe Trim Muffler Rear Tail Pipe Tip Tailpipe Car End Tipe Blue for Qashqai 2014 2015 2016 2017 2018 2019 2020 (For Car curved orginal tailpipe)

Re: Exhaust / Tail pipe

Posted: Sun Feb 23, 2020 5:37 pm
by Gove
I’d been interested to see how they look once fitted.

Re: Exhaust / Tail pipe

Posted: Sun Feb 23, 2020 6:01 pm
by daddydoug
Have a look on Ali Express for the above one's that you have found on Amazon. You will probably find that they are a bit cheaper via good old Ali Express.

Doug

Re: Exhaust / Tail pipe

Posted: Sun Feb 23, 2020 6:19 pm
by DaveBerlin
Lusky, All interested parties. Please take a look at the attached what I installed on the QQ J11A. It installed easily, looked good, but had to be removed for the TÜV (MOT) here as there was a Gitter welded inside, disassembly was a few minutes only - for Emission Test.
Now I thought ahead before we got the QQ J11B and ordered a similiar one which was Wrong ! It does not fit. I was about to get out this weekend and perhaps do a bit of panel beating but the rain ended that. It fits but the Oval Form is not “In Line” with the Road it’s tilted and looks terrible.
It looks like the only effective way is to lay under the QQ, take a few dimensions, knock up a cardboard pattern and then make a visit to an Accessory Shop or Exhaust Shop or just hope it fits. Most state they will fit the QQ but are generally “Universal” - Dave 😉

https://www.qashqaiforums.co.uk/viewtopic.php?f=21&t=3962
New. For J11B :

603FC9B1-47FE-40D1-843A-9A6405555432.jpeg

3D45D329-E6C6-4ABD-AF29-2F3C08871FDB.jpeg


Re: Exhaust / Tail pipe

Posted: Sun Feb 23, 2020 6:28 pm
by Lusky
DaveBerlin wrote: Sun Feb 23, 2020 6:19 pm Lusky, All interested parties. Please take a look at the attached what I installed on the QQ J11A. It installed easily, looked good, but had to be removed for the TÜV (MOT) here as there was a Gitter welded inside, disassembly was a few minutes only - for Emission Test.
Now I thought ahead before we got the QQ J11B and ordered a similiar one which was Wrong ! It does not fit. I was about to get out this weekend and perhaps do a bit of panel beating but the rain ended that. It fits but the Oval Form is not “In Line” with the Road it’s tilted and looks terrible.
It looks like the only effective way is to lay under the QQ, take a few dimensions, knock up a cardboard pattern and then make a visit to an Accessory Shop or Exhaust Shop or just hope it fits. Most state they will fit the QQ but are generally “Universal” - Dave 😉

https://www.qashqaiforums.co.uk/viewtopic.php?f=21&t=3962
New. For J11B :
603FC9B1-47FE-40D1-843A-9A6405555432.jpeg

3D45D329-E6C6-4ABD-AF29-2F3C08871FDB.jpeg
Thanks Dave,
From what i see the two I've picked are purely cosmetic nothing inside so should be ok but I will ask the question. So plain chrome or blue tinted?
Lusky

Re: Exhaust / Tail pipe

Posted: Sun Feb 23, 2020 7:24 pm
by Lusky
Gove wrote: Sun Feb 23, 2020 5:37 pm I’d been interested to see how they look once fitted.
Chrome or blue in your opinion?

Re: Exhaust / Tail pipe

Posted: Sun Feb 23, 2020 7:30 pm
by DaveBerlin
Lusky, these are purely for a pleasing effect cosmetic not an Exhaust just a bolt on Chrome Tip. But again the bolt on is normally by 3 screws and nuts but you have to miss parts of the underbody so there is a possibility of the pipe clashing with Body Parts. A straight tube would be the easiest and quickest mod. Just lay under the QQ and assess the problem.
From what I can remember the tailpipe bends down it is not straight.
I do not think they will fit and look correct and I do not think it is allowed to have a Tail Pipe sticking out past the Body Line be careful - Dave 😉

Re: Exhaust / Tail pipe

Posted: Sun Feb 23, 2020 8:07 pm
by Gove
Lucky,as Dave says I don’t think they’ll sit right and point downwards instead of being straight!

Re: Exhaust / Tail pipe

Posted: Fri Jun 19, 2020 9:19 pm
by DaveBerlin
So this week I decided to approach the installation of this Exhaust Chrome Tip on the QQ J11B Std Nissan Exhaust Pipe. The approach was firstly to lay under the QQ and visualize what was needed. Basically I had to remove Steel (Hacksaw / Cutters) and Form / Bend a Lug for Screwing. The existing Exhaust was from the floor 28cm high and the Final with the Chrome Tip 24cm. I reworked the Tip so that it would push far enough back that when the Exhaust System Flexed the Tip would not clash or bang with the Bodywork. It took time and patience but does not look bad. The End has a Gitter Cover and there is a large Exhaust Gas hole underneath and can be used for access for Tubes when the MOT / TÜV Boys check the CO2 reading - Job Done 👍 - Dave 😉

These pics show the distance from floor to base of pipe 28cm :

24D381F7-1A2D-4605-ACC5-E4FBE832328E.jpeg

DE2732B8-CF04-490C-BFD7-5C6EE7E0CB6C.jpeg

These show the modified Tip (Cut & Bent) :

004AF16B-4324-4B42-967F-76C05C66E6BE.jpeg

886F7871-CB33-4726-86EE-48E5053F6DF4.jpeg

The Tip installed and secured with the 3 Threaded Screws & Nuts (Greased) :

9D8D8965-ED7B-412B-A756-FA1284FBEFCD.jpeg

Base of Tip 24cm from floor can flex up and down without clashing with the Bodywork ::

CDB5064C-EA03-4A5A-A8E0-DF5A17CC5A6B.jpeg

Rear View :

C5A7DE31-C0BE-4A2A-BA08-F9BA5B5600D7.jpeg