Hi,
I have a 2015 QQ 1.5 dCi with 16inch non alloy wheels. I have seen a set of four new alloys that were bought for a 2008 Nissan Qashqai+2 2.0L 4WD with the following spec:
Diameter / Size = 17"
Rim Width = 6.5J
Offset = +40
Studs/Pattern = 5 x 114.3
I am pretty certain that they would fit my QQ but just want to make sure?
Thanks!
Alloy wheels
-
- Posts: 5
- Joined: Fri May 08, 2020 12:51 pm
- Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)
-
- Posts: 8623
- Joined: Wed Mar 19, 2014 12:39 pm
- Location: Berlin, Germany
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
What you mention are for a AWD QQ but the Wheel Sizes look like they should fit but being just a bit narrower (6,5J x 17”) than normal. The Centre Bore should be 66,1mm - Dave
A 5-lug Nissan vehicle (including Infiniti and Datsun) will have a bolt pattern of 5 x 114.3. (5 lugs, 114.3mm apart).
Here are some more facts :
A 5-lug Nissan vehicle (including Infiniti and Datsun) will have a bolt pattern of 5 x 114.3. (5 lugs, 114.3mm apart).
Here are some more facts :
11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken
-
- Posts: 5
- Joined: Fri May 08, 2020 12:51 pm
- Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)
Hi, thanks for your reply.
Yes the centre bore is 66.1mm.
Yes they are 6.5 as opposed to 7 but should be fine with a 215/60 R17 H (96) tyre.
All the measurements look to be ok.
Thanks
Yes the centre bore is 66.1mm.
Yes they are 6.5 as opposed to 7 but should be fine with a 215/60 R17 H (96) tyre.
All the measurements look to be ok.
Thanks