Parking Sensor damaged

New to the Nissan QashQai Forums? Introduce yourself here
Post Reply
Patmickel
Posts: 2
Joined: Sun Nov 05, 2017 10:43 am
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–present)

Parking Sensor damaged

Post by Patmickel » Sun Nov 05, 2017 12:14 pm

Hi I'm new to the forum and have searched for instructions to remove/replace front parking sensors on 2017 Dig T NVision. The sensor has been stone chipped and is taking in water. The two middle front senors look impossible to get to without taking the bumper off. By removing the blanking plate for tow hook you can see a screw and clip holding on sensor nearest passenger side but unfortunately the one I need to replace is nearest driver side (RH Drive). The part number for replacement sensor is 284384EA0A and is only £22.00 but the dealer is quoting £227.00 to replace it hence my reluctance.
Any advice most welcome.


Edi
Posts: 1
Joined: Thu Aug 23, 2018 11:09 am
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Re: Parking Sensor damaged

Post by Edi » Thu Aug 23, 2018 11:17 am

Hi
I will say do it yourself
Is easy
The dealer asked me 3000 to replace my front bumper but I done it myself :D


User avatar
Gel
Posts: 2736
Joined: Thu May 22, 2014 12:02 pm
Location: Thames Valley UK
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Re: Parking Sensor damaged

Post by Gel » Thu Aug 23, 2018 11:54 am

I'd buy part and get a local independent garage or Bodyshop to fit; much cheaper hourly rate than Nissan dealer. :?
Attached may assist.

Front bumper removal.jpg

J11A-14 1.5dci Ink Blue Tekna; Chrome Pack, Bonnet Struts, Flaps, Blue Alloygators, SpeedLock,Door & Tailgate Sill guards/Decent horns/ Autoglym Lifeshine /19" Wheels


Post Reply

Return to “Introductions”