Nissan QashQai Forums

Hi Guys,
Newbie here and picking my 2013 Qashqai 360 1.5 DCI up tomorrow and can’t wait, already looking for little add-ons for it and considering putting different alloys on it as got a set of 18” ones off my old Mégane which hopefully will fit and do you have to stick to original tyre size or can you put lower profile ones on?
These are the alloys and not a very good picture of them
Cheers Guys

Looking at your pic the Megane’s seems to have 4 Stud Fixings which will not fit the QQ as these are the Nissan Std 5 Stud Fixing. I have added an attachment as an example which seems to confirm that the Renault has 60,1mm Dia Centre Bore / 4 x 100mm Pitch Bolting / M12 x 1,5 Threads. The QQ has 66,1mm Dia Centre Bore / 5 x 114,3mm - I hope this helps Dave
Please double check these points before considering :

viewtopic.php?f=28&t=6861&p=58302&hilit ... olt#p58281
Nissan Qashqai 2013 360* (5 Fixing Studs) :

Thanks Dave but my old Mégane was a 2011 model and was definitely 5 stud, I’m hoping that all I need to do is change the spigot in the centre hub

Info from https://www.wheel-size.com

Thanks Gloucester and as I suspected my aftermarket Alloys should go straight on with the correct spigot for the hub, I’ll post a picture of Alloys later as think they will look good on the QQ