just joined (QQ 2020)

[moasar]

Hi All,
am 38 instrumentation & control engineer in the oil & gas field.
it's pleasure to join you here for the first time. But I just wonder if there are any topics related to 2020 model here?. I need to know about problems or any other issues related to 2020 model and share thoughts.
Thanks for this nice forum in advance.

[DaveBerlin]

Moasar, firstly welcome to the Forum. There are very little comments on the 2020 model as there most likely are not that many around. The models that are now being produced will most likely not change a lot until the New Generation QQ comes out supposedly later in the year. Attached is a pretty long post with a lot of data in it on the J11B that is well worth a read. We have had a 2019 Tekna + ProPILOT model since Dec and we believe that will be the last version, up to now no problems. If you use “Search” you will find lots more facts but it takes time to search and read - Dave

viewtopic.php?f=21&t=7097&start=120
Here are some facts on our QQ if this is of interest :
viewtopic.php?f=21&t=9061&p=75657&hilit ... kna#p75657

[Pandjh]

Not many posts about 2020 model = not many issues found so far =

I would post about issues with my 2019 model... but i haven't had anything other than software needing an update.