New J11b tekna member

New to the Nissan QashQai Forums? Introduce yourself here
RiveriaMan
Posts: 95
Joined: Fri Jul 26, 2019 5:21 pm
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by RiveriaMan »

Hi verudela, many thanks, as others have also pointed out then it does not look as though they are pointing straight out the back and are at a slight angle, so even though they fit from a exhaust pipe diameter perspective, and clear car bodywork, then not what I would be looking for.
Qashqai J11 2017 1.5 dci N-Connecta - Upgraded Horn - Upgraded Boot Lights - Bonnet Gas Struts - Hard Wired Dash Cam (Front/Rear) Dynamic Turn Indicators (Front/Mirror), Twin Exhaust Muffler, LED Interior, Reverse, Glove Box, Footwell, Puddle Lights.

DaveBerlin
Posts: 8623
Joined: Wed Mar 19, 2014 12:39 pm
Location: Berlin, Germany
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by DaveBerlin »

RiveriaMann, unfortunately as you undoubtably have seen under the QQ the Exhaust Pipe is pretty sturdy from the Box and the exhaust gases are directed downwards. The Tip I installed had an opening at the Bottom (Gases Exhaust Down) and at the Rear of the Tip (Two Openings). If you want a “Straight” Tip it will most probably mean the part removal of the extension piece and or a Welded Job - not easy, definitely not cheap and it could get messy - Dave 😉

F9FE95DA-9E0E-4271-B2C8-2F8EED605E51.jpeg

11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken
RiveriaMan
Posts: 95
Joined: Fri Jul 26, 2019 5:21 pm
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by RiveriaMan »

Hi Dave, there is definitely something going on with models, years, engines etc as my exhaust pipe from the box turns and then faces towards the back bumper (with the end of the pipe hidden by the bumper) your photo shows the pipe facing... it appears towards the direction of the side/wheel arch. Odd indeed. :?
Qashqai J11 2017 1.5 dci N-Connecta - Upgraded Horn - Upgraded Boot Lights - Bonnet Gas Struts - Hard Wired Dash Cam (Front/Rear) Dynamic Turn Indicators (Front/Mirror), Twin Exhaust Muffler, LED Interior, Reverse, Glove Box, Footwell, Puddle Lights.
DaveBerlin
Posts: 8623
Joined: Wed Mar 19, 2014 12:39 pm
Location: Berlin, Germany
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by DaveBerlin »

RiveriaMann, highly likely Petrol vs Diesel Exhaust System difference. Ours is the 1,3L 160PS Motor - Dave 🙂
11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken
User avatar
Red Rooster
Posts: 103
Joined: Thu Aug 25, 2016 10:05 pm
Qashqai Model: Mk.3 Qashqai - J12 (2021+) New Model

Post by Red Rooster »

Well this is getting an interesting thread. :? ...Will mine fit when it arrives is the question :? . Dave and verbudela both got same models as mine but their exhausts are different. :? Didnt bother to check in under first :oops:
58 plate 2.0 l petrol Acenta
2016 1.6 DIG-T Ink Blue
2019 1.3 DiG-T 160 Tekna, Ink Blue
2024 1.3 DIG-T 160 MHEV Tekna with bose and led fog lights.Mag blue Black roof.
DaveBerlin
Posts: 8623
Joined: Wed Mar 19, 2014 12:39 pm
Location: Berlin, Germany
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by DaveBerlin »

RiveriaMann, just to confirm I have checked again and my Outlet Pipe does exit the Main Box to the Side, but the End Form is actually radial and directed at the ground - See the Photo above ! The new Tip has an Exit Hole for the Exhaust Gases underneath, this is as well as the normal end position. I tried to position the Tip in line with the Exhaust Pipe Gas Outlet - See Photo below ! - Dave 😉

Looking underneath through the Tip Hole you can see the Outline of the Existing Outlet Pipe :

C06107C7-52E3-4D1D-80B8-D5FACF40F8B1.jpeg

11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken
User avatar
Red Rooster
Posts: 103
Joined: Thu Aug 25, 2016 10:05 pm
Qashqai Model: Mk.3 Qashqai - J12 (2021+) New Model

Post by Red Rooster »

Well I have just looked under mine and it looks like the same as Daves....so what verbudela got i dont know..£23 down the pan I guess :evil:
58 plate 2.0 l petrol Acenta
2016 1.6 DIG-T Ink Blue
2019 1.3 DiG-T 160 Tekna, Ink Blue
2024 1.3 DIG-T 160 MHEV Tekna with bose and led fog lights.Mag blue Black roof.
verudela
Posts: 43
Joined: Tue May 19, 2020 5:24 pm
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by verudela »

my car was not made in india it was made in
sunderland , all reviews are top on ali from those
who purchased the item, wait for your muffler before
calling the devil:) I’ll help you if you can’t install it, I’ll
dismantel the thing, put it back and take pictures of both
if needed
User avatar
Red Rooster
Posts: 103
Joined: Thu Aug 25, 2016 10:05 pm
Qashqai Model: Mk.3 Qashqai - J12 (2021+) New Model

Post by Red Rooster »

verudela wrote: Tue Jun 23, 2020 5:00 pm my car was not made in india it was made in
sunderland , all reviews are top on ali from those
who purchased the item, wait for your muffler before
calling the devil:) I’ll help you if you can’t install it, I’ll
dismantel the thing, put it back and take pictures of both
if needed
Mine was built to order in Sunderland as well......Oh well wait and see
58 plate 2.0 l petrol Acenta
2016 1.6 DIG-T Ink Blue
2019 1.3 DiG-T 160 Tekna, Ink Blue
2024 1.3 DIG-T 160 MHEV Tekna with bose and led fog lights.Mag blue Black roof.
DaveBerlin
Posts: 8623
Joined: Wed Mar 19, 2014 12:39 pm
Location: Berlin, Germany
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by DaveBerlin »

Personally I think that the suggestion Verudela has made would be a great idea to clear up the possible problem or question of installing this Tip. Red Rooster the pics I have looked at attached, might or might not be what you have ordered. There appears only to be the Straight Pipe fit to the QQ which I would assume will be at a slight downward angle. Whether there is a restriction of the Exhaust Gases I am not sure as the Tip appears to be a closed part - Please do not take these comments as criticisms but more of thinking out loud - Dave 🤨

2A75327B-EDC2-4206-B432-99CBB1E20DAE.jpeg


87E5249C-7EC4-45A5-BE36-898B7C3B100B.jpeg

11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken
Post Reply