Nissan to Cut Global Production

The place to discuss everything else..
Post Reply
DaveBerlin
Posts: 8623
Joined: Wed Mar 19, 2014 12:39 pm
Location: Berlin, Germany
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by DaveBerlin »

News is floating around on Nissan Global Cut Backs - Dave 🤨
“Nissan Motor will cut global production by about 15% over the next 12 months, compared to what it forecast for the year ending March 2019, Nikkei has learned, as the Japanese automaker shifts away from the aggressive expansion campaign promoted by former Chairman Carlos Ghosn”.

Nissan to slash global production by 15% -
https://asia.nikkei.com/Business/Nissan ... tion-by-15

Nissan slams output cut report as 'completely incorrect' -
https://www.reuters.com/article/us-niss ... SKCN1RV039
11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken

Geordieman
Posts: 192
Joined: Mon Nov 13, 2017 7:14 pm
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by Geordieman »

It was in the news that all car manufacturers are selling less vehicles so that would make sense to cut back.
2020 Tekna 1.3 DCT Auto, Pearl Black, Pan Roof, Heated Screen, ss door sills, Chrome door handle covers, ss Reg Plate frames, Gas Bonnet struts, chrome wheel nut covers, black side protection strips.
DaveBerlin
Posts: 8623
Joined: Wed Mar 19, 2014 12:39 pm
Location: Berlin, Germany
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by DaveBerlin »

Regarding April 19, 2019 Nikkei Shimbun article Nissan have now denied this - Dave 🙂
https://newsroom.nissan-global.com/rele ... 90419-03-e
11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken
Post Reply