well not a good start with my new 2012 QQ.
pulled into the car park this morning and the handbrake doesn't work. lever just pulls all the way up with no sign of it doing anything.
had to leave it in gear as the car park is on a very slight slope.
is there anything i can physically check before taking it back into the garage?
handbrake not working
- Gel
- Posts: 3265
- Joined: Thu May 22, 2014 12:02 pm
- Location: Thames Valley UK
- Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)
2012 car is hardly new!
Get it back to suppliers to fix and this is a safety issue that could get you a ticket if stopped by Mr plod.
Get it back to suppliers to fix and this is a safety issue that could get you a ticket if stopped by Mr plod.
2014-19 J11A-14 1.5dci Ink Blue Tekna owner; now departed for a Mazda CX-5 GT Sport Nav, 2.0L Petrol
-
- Posts: 42
- Joined: Fri Mar 09, 2018 10:49 am
- Qashqai Model: Mk.3 Qashqai - J12 (2021+) New Model
new to me, as in i just collected it at the weekend from the dealer.
and yes i know i'll be taking it back, i was asking if there was something obvious i could check in the mean time.
and yes i know i'll be taking it back, i was asking if there was something obvious i could check in the mean time.
2012 1.5 dci N-TEc+
Try to make sure they don't fob you off by just tightening up the cables behind the handbrake lever. The correct way is to remove rear wheels and with a screwdriver poked through the hole in each drum, turn the cogwheel until handbrake binds, then back off a whisker.
2013 J10 SE 1.6 dCi 6speed manual, 4wd.