J11 1.5 dci 2016 jack stand position

Forum for wheels, tyres, suspension, chassis, brakes
User avatar
calnorth
Posts: 2719
Joined: Mon Feb 11, 2019 2:01 pm
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by calnorth »

Your quad pic got the part I was on about Dave. Where the Production line had a hold of the car body (pinned thru hole).The location hole in the outward wide spar. And thats where the garage hyrdaulic lift...arm lifts from *4:


........

_2020-05-28_142657_www.qashqaiforums.co.uk.png

Mk2 Qashqai Facelift - J11b (2017–and onward)
1.6 Dig-T N-Connecta

RVW
Posts: 226
Joined: Tue May 03, 2016 6:35 am

Post by RVW »

IMG_1650.jpeg

IMG_1649.jpeg

Hi DFave Thanks for info.
I have one of those jack pad things and i found them totally useless. It compressed so much it distorted to one side.
I think I have solved it now , have jacked up on the lower suspension arm and then placed axle stands in the correct jack point. Why oh Why is it so difficult to find official info on these cars?
In the end I have had to go on my gut instinct and years of motoring , but it shouldn't be like that. There is nothing in owners handbook( well not in mine)to tell/show you the safest way to do this.
J11-2016 QashQai Tekna 1.5dci Magnetic Red
DaveBerlin
Posts: 8623
Joined: Wed Mar 19, 2014 12:39 pm
Location: Berlin, Germany
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by DaveBerlin »

RVW, this is from an old post from 2017 - Dave 😉

228C9A77-B5C9-4C9A-828E-F87637C7D236.jpeg

11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken
RVW
Posts: 226
Joined: Tue May 03, 2016 6:35 am

Post by RVW »

F10A3862-3804-4CFB-9A7F-C36121A84949.jpeg

Hi, the bit I have marked is not present on my car. I assume it was removed when I had the towbar fitted
J11-2016 QashQai Tekna 1.5dci Magnetic Red
Post Reply