Cruise not working

ICE, Equipment, Options
Post Reply
Robfez29
Posts: 2
Joined: Fri Jul 23, 2021 12:09 pm
Qashqai Model: Mk.1 Qashqai Facelift - J10b (2010–2013)

Post by Robfez29 »

So a couple months ago I bought a 2011 Qashqai 1.5 DCI.
From day one I noticed the cruise control does nothing, nothing on the dash, you can press any button and nothing shows up at all.
Now I've tried checking the pedal switches, they look fine, checked for faults, no faults reading on the car.
I've reset the ECU, nothing.

I'm running out of options and yet nobody in the world seams to have this issue and I've search high and low on the web but nothing.

Any assistance would be greatly appreciated.

Thanks.

User avatar
calnorth
Posts: 2719
Joined: Mon Feb 11, 2019 2:01 pm
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by calnorth »

The system is the following diagram...inputs mainly:

All connections check might reveal something - Steering and Gear Position switching?

..........

Sc49.png

Mk2 Qashqai Facelift - J11b (2017–and onward)
1.6 Dig-T N-Connecta
Robfez29
Posts: 2
Joined: Fri Jul 23, 2021 12:09 pm
Qashqai Model: Mk.1 Qashqai Facelift - J10b (2010–2013)

Post by Robfez29 »

The problem is that even when stationary you should be able to set the speed and show the display but nothing comes up on the computer
User avatar
calnorth
Posts: 2719
Joined: Mon Feb 11, 2019 2:01 pm
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by calnorth »

Robfez29 wrote: Fri Jul 23, 2021 1:21 pm The problem is that even when stationary you should be able to set the speed and show the display but nothing comes up on the computer
Possibly completely disconnected around the steering wheel area?

There are some tests that involve pressing the ASCD buttons on the steering wheel for 10 secs and checking for DTCS related. Try this:

PERFORM DTC CONFIRMATION PROCEDURE

1. Turn ignition switch ON.
2. Wait at least 10 seconds.
3. Press MAIN switch for at least 10 seconds, then release it and wait at least 10 seconds.
4. Press CANCEL switch for at least 10 seconds, then release it and wait at least 10 seconds.
5. Press RESUME/ACCELERATE switch for at least 10 seconds, then release it and wait at least 10 seconds.
6. Press SET/COAST switch for at least 10 seconds, then release it and wait at least 10 seconds.
7. Check DTC.

A generic OBD Scanner might pick up DTCs like

P1564 ASCD STEERING SWITCH
And others similar
Mk2 Qashqai Facelift - J11b (2017–and onward)
1.6 Dig-T N-Connecta
User avatar
gloucester
Posts: 5173
Joined: Sun Apr 03, 2016 7:04 am
Location: Gloucestershire, England
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by gloucester »

Robfez29 wrote: Fri Jul 23, 2021 1:21 pm The problem is that even when stationary you should be able to set the speed and show the display but nothing comes up on the computer
Welcome to the forum

Are you sure? Cruise control doesn't work under approx 20mph. Usually the speed is "set" at the current speed.
(2015 Nissan Qashqai Tekna DIG-T 1.2 sold 15/6/18) ~ 2018 Suzuki Ignis SZ5 - 2018 Yamaha MT-07 ~ (2024 Volvo EX30 ordered)
Post Reply