does anyone know where the fuse is located supplying the towbar electrics?
I want to remove it to see if its pulling my battery down but I have been unable to locate it.
Nissan Qashqai 2019 (J11) model Tekna 1.3 turbo petrol
Fuse location for tow bar electrics
- calnorth
- Posts: 2719
- Joined: Mon Feb 11, 2019 2:01 pm
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
What is the battery make...if its FIAMM get ready to call Nissan
Do you have a diagram for the towbar electrics? Towbar circuits would be open circuit when not plugged up. Unless something different exists in the wiring? Perhaps a dedicated circuit which isn't using the cars own power controlled system (IPDM).
Do you have a diagram for the towbar electrics? Towbar circuits would be open circuit when not plugged up. Unless something different exists in the wiring? Perhaps a dedicated circuit which isn't using the cars own power controlled system (IPDM).
Mk2 Qashqai Facelift - J11b (2017–and onward)
1.6 Dig-T N-Connecta
1.6 Dig-T N-Connecta
- lapalmeraie
- Posts: 386
- Joined: Tue Mar 28, 2017 5:11 am
- Location: Belgium
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
- Contact:
It is located here; (I paused it were you see it), it's the second 30A from above
Qashqai J11b 2020 N-TEC - 1.3 DIG-T 140PS
Qashqai J11a Connect Edition 1.6 DIG-T 163PS
Qashqai J11a Connect Edition 1.6 DIG-T 163PS
- calnorth
- Posts: 2719
- Joined: Mon Feb 11, 2019 2:01 pm
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
A few days back someone here carried out a 7 pin tow bar installation. Post linked below. Apparently there is a connector pre installed at production in the boot...so take a look at the post:
viewtopic.php?f=29&t=10183
Looking at the Nissan diagnostic diagrams there is no specific tow bar fuses. Lights are controlled by Smart FETS which are not replaceable. 11 of them. If the tow bar is 13pin for Fridge etc then I suspect dedicated extra wiring will need to be installed and be separately fused somewhere near the IPDM related fuse block. IPDM controls all the cars body power requirements. Engine feeds are separate and fused accordingly.
viewtopic.php?f=29&t=10183
Looking at the Nissan diagnostic diagrams there is no specific tow bar fuses. Lights are controlled by Smart FETS which are not replaceable. 11 of them. If the tow bar is 13pin for Fridge etc then I suspect dedicated extra wiring will need to be installed and be separately fused somewhere near the IPDM related fuse block. IPDM controls all the cars body power requirements. Engine feeds are separate and fused accordingly.
Mk2 Qashqai Facelift - J11b (2017–and onward)
1.6 Dig-T N-Connecta
1.6 Dig-T N-Connecta
- lapalmeraie
- Posts: 386
- Joined: Tue Mar 28, 2017 5:11 am
- Location: Belgium
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
- Contact:
But that connector (behind the boot liner in the upper right corner right?) doesn't has an additional fuse so that doesn't answers the TS's question. Correct me if I'm wrong.
The fuse I indicate is for the tow hook if I may believe the Nissan mechanic who told me about it
The fuse I indicate is for the tow hook if I may believe the Nissan mechanic who told me about it
Qashqai J11b 2020 N-TEC - 1.3 DIG-T 140PS
Qashqai J11a Connect Edition 1.6 DIG-T 163PS
Qashqai J11a Connect Edition 1.6 DIG-T 163PS
- calnorth
- Posts: 2719
- Joined: Mon Feb 11, 2019 2:01 pm
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
He's asking about parasitic leakage Niek. Thats my take anyway. The tow bar electrics would only be wires and perhaps additional wires/fuses for a 13pin socket. If its a Nissan loom addition then ask Nissan. Without an as built diagram we are stuffed.lapalmeraie wrote: ↑Thu Oct 08, 2020 2:50 pm But that connector (behind the boot liner in the upper right corner right?) doesn't has an additional fuse so that doesn't answers the TS's question. Correct me if I'm wrong.
The fuse I indicate is for the tow hook if I may believe the Nissan mechanic who told me about it
I don't know what additional wiring might be present and that might be to the Battery direct.
For J11A I saw a 30A "OPTION" fuse named F39 (I think). However, that would need a separate cable out to the tow bar socket...Fridge/12v ring cct etc?
Colin
Mk2 Qashqai Facelift - J11b (2017–and onward)
1.6 Dig-T N-Connecta
1.6 Dig-T N-Connecta
- lapalmeraie
- Posts: 386
- Joined: Tue Mar 28, 2017 5:11 am
- Location: Belgium
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
- Contact:
You’re absolutely right Colin
Qashqai J11b 2020 N-TEC - 1.3 DIG-T 140PS
Qashqai J11a Connect Edition 1.6 DIG-T 163PS
Qashqai J11a Connect Edition 1.6 DIG-T 163PS
- calnorth
- Posts: 2719
- Joined: Mon Feb 11, 2019 2:01 pm
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
Think some of the tow bar kits incorporate a relay to switch stuff in or out...never seen a functional diagram so its all a bit...magical?
Mk2 Qashqai Facelift - J11b (2017–and onward)
1.6 Dig-T N-Connecta
1.6 Dig-T N-Connecta
- lapalmeraie
- Posts: 386
- Joined: Tue Mar 28, 2017 5:11 am
- Location: Belgium
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
- Contact:
Qashqai J11b 2020 N-TEC - 1.3 DIG-T 140PS
Qashqai J11a Connect Edition 1.6 DIG-T 163PS
Qashqai J11a Connect Edition 1.6 DIG-T 163PS