Chassis Control Graphic

ICE, Equipment, Options
malvern_man
Posts: 40
Joined: Tue Sep 01, 2020 2:08 pm
Location: Derbyshire.
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–present)

Chassis Control Graphic

Post by malvern_man » Sat Oct 31, 2020 2:43 pm

Hi all,

When I flick through the various graphics that you can have showing in the central display between the rev counter and the speedo one of them is the chassis control graphic, is it meant to do anything such as light up or flash etc?
When I have it showing it's just a picture of a car, I've even tried caning it round a really tight bend on a sliproad coming off a duel carriageway near to me but the graphic doesn't do anything.

Regards, Chris.
2020 (70 Plate) 1.3 DiG-T 140 ~ 6 Speed Manual ~ Tekna+ in Pearl Black.

DaveBerlin
Posts: 7556
Joined: Wed Mar 19, 2014 12:39 pm
Location: Berlin, Germany
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–present)

Re: Chassis Control Graphic

Post by DaveBerlin » Sat Oct 31, 2020 4:25 pm

Chris, take a look at this it might help or use “Search” as there has been a few posts recently - Dave 😉

51098DA6-00A9-487B-84B8-DC63F9A1C923.jpeg

Just for information : Chassis Control | NISSAN | TECHNOLOGICAL DEVELOPMENT ACTIVITIES : https://www.nissan-global.com/EN/TECHNO ... ntrol.html
11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken

User avatar
gloucester
Posts: 2633
Joined: Sun Apr 03, 2016 7:04 am
Location: Gloucestershire, England
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Re: Chassis Control Graphic

Post by gloucester » Sat Oct 31, 2020 4:34 pm

(2015 Nissan Qashqai Tekna DIG-T 1.2 sold 15/6/18) ~ 2018 Suzuki Ignis SZ5 - 2018 Yamaha MT-07

malvern_man
Posts: 40
Joined: Tue Sep 01, 2020 2:08 pm
Location: Derbyshire.
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–present)

Re: Chassis Control Graphic

Post by malvern_man » Sat Oct 31, 2020 4:39 pm

DaveBerlin wrote:
Sat Oct 31, 2020 4:25 pm
Chris, take a look at this it might help or use “Search” as there has been a few posts recently - Dave 😉

51098DA6-00A9-487B-84B8-DC63F9A1C923.jpeg

Just for information : Chassis Control | NISSAN | TECHNOLOGICAL DEVELOPMENT ACTIVITIES : https://www.nissan-global.com/EN/TECHNO ... ntrol.html


Hi Dave,

I did try the search facility first but it just brings up posts about faults and changing pipes.

I've just been through the various settings and I can't find anywhere where is says turn chassis control on or off, active trace control is switched on though.

On the attachment in your post what is the small graphic just below the 19°c

Regards, Chris.
2020 (70 Plate) 1.3 DiG-T 140 ~ 6 Speed Manual ~ Tekna+ in Pearl Black.

DaveBerlin
Posts: 7556
Joined: Wed Mar 19, 2014 12:39 pm
Location: Berlin, Germany
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–present)

Re: Chassis Control Graphic

Post by DaveBerlin » Sat Oct 31, 2020 5:34 pm

Chris, try this comment from Nissan - Dave 😉

B2EA302F-EF34-4C01-893B-E6B70FEC2CD2.jpeg

11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken

User avatar
gloucester
Posts: 2633
Joined: Sun Apr 03, 2016 7:04 am
Location: Gloucestershire, England
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Re: Chassis Control Graphic

Post by gloucester » Sun Nov 01, 2020 9:03 am

malvern_man wrote:
Sat Oct 31, 2020 4:39 pm

I've just been through the various settings and I can't find anywhere where is says turn chassis control on or off, active trace control is switched on though.
Same thing? Check settings:

[Chassis Control]

This allows you to turn [Trace Control] and [Engine Brake] on or off.

– [Trace Control]:
(For more information, see “Intelligent Trace Control” in the “5. Starting and driving” section)
– [Engine Brake]:
(For more information, see “Intelligent Engine Brake (for Xtronic (CVT) models only)” in the “5. Starting and driving” section)

...

11. [Chassis Control]

When either the Intelligent Trace Control (where fitted), Intelligent Engine Brake (where fitted), Easy Hill Start (where fitted) or the Intelligent Ride Control
system is operated, it shows the operating condition. See “Chassis control” in the “5. Starting and driving” section and “Easy Hill Start (EHS) (where fitted)” in the “5. Starting and driving” section for more details.

...

chassis.JPG

(2015 Nissan Qashqai Tekna DIG-T 1.2 sold 15/6/18) ~ 2018 Suzuki Ignis SZ5 - 2018 Yamaha MT-07

malvern_man
Posts: 40
Joined: Tue Sep 01, 2020 2:08 pm
Location: Derbyshire.
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–present)

Re: Chassis Control Graphic

Post by malvern_man » Thu Nov 05, 2020 6:13 pm

** Update **

I went down a local country lane today with some sharp bends, I managed to get the chassis control graphic lighting up like a Christmas tree, so I now know it actually works 👍

Regards, Chris.
2020 (70 Plate) 1.3 DiG-T 140 ~ 6 Speed Manual ~ Tekna+ in Pearl Black.

Happyhouse14
Posts: 11
Joined: Sat Oct 17, 2020 2:34 pm
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–present)

Re: Chassis Control Graphic

Post by Happyhouse14 » Sat Nov 21, 2020 2:07 pm

Hi Chris, I am having the same issue with the Chassis control, on the vehicle information display, all I see is a car, not cross-hatching and certainty no blue areas lighting up to left or right as I corner. So you only see the cross-hatching and lights on extreme bends? Do you need to throw it into a bend?

2020 (70 Plate) Auto

malvern_man
Posts: 40
Joined: Tue Sep 01, 2020 2:08 pm
Location: Derbyshire.
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–present)

Re: Chassis Control Graphic

Post by malvern_man » Sat Nov 21, 2020 5:58 pm

Happyhouse14 wrote:
Sat Nov 21, 2020 2:07 pm
Hi Chris, I am having the same issue with the Chassis control, on the vehicle information display, all I see is a car, not cross-hatching and certainty no blue areas lighting up to left or right as I corner. So you only see the cross-hatching and lights on extreme bends? Do you need to throw it into a bend?

2020 (70 Plate) Auto

Hi Happyhouse,

I've only had it light up once for me and that was because I was deliberately trying to (having said that I normally have my speed graphic up and not the one for the chassis control)
The only way I got it to light up (all 4 corners went blue) was to go into a 90° right-hand bend a bit quicker than I normally would, but not so quick that I would end up in the ditch if the chassis control didn't kick in.
The road was slightly damp with some fallen leaves on the bend.

Regards, Chris.
2020 (70 Plate) 1.3 DiG-T 140 ~ 6 Speed Manual ~ Tekna+ in Pearl Black.

User avatar
gloucester
Posts: 2633
Joined: Sun Apr 03, 2016 7:04 am
Location: Gloucestershire, England
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Re: Chassis Control Graphic

Post by gloucester » Sat Nov 21, 2020 6:40 pm

Try a large empty car park next time!
(2015 Nissan Qashqai Tekna DIG-T 1.2 sold 15/6/18) ~ 2018 Suzuki Ignis SZ5 - 2018 Yamaha MT-07

Post Reply