Page 7 of 13

Re: Project: Reversing / Disabling Stop/Start feature

Posted: Tue Jul 26, 2016 8:24 am
by duncho
:))
I would be happy if Singaporean QQ owners write their feedback here on the forum. I will check with Richard who organised everything in regards to group purchase ;)

Re: Project: Reversing / Disabling Stop/Start feature

Posted: Wed Jul 27, 2016 9:37 am
by duncho
As my car was crashed into over last night, I should have more time to build the modules. I will send an email with details and gathering the shipping address to each member on the list.

Small update in regards to DRL module price, it is extensively time demanding to build one pair so I need to rise the price for a pair (2pcs in the kit) which final price is £60. I understand that for some members this will be no go as it is £20 more expensive. I apologise, but I cannot supply such quantity in reasonable time as I would need to be fully occupied just with modules manufacturing.

Price for S/S module will not change and remains as it was i.e. £25 per module (1pcs is required per car).

Thank you all for your understanding.

Re: Project: Reversing / Disabling Stop/Start feature

Posted: Wed Jul 27, 2016 12:04 pm
by Hound
Very sorry to hear about your car. I hope it gets sorted out quickly!

Re: Project: Reversing / Disabling Stop/Start feature

Posted: Tue Aug 02, 2016 7:50 pm
by frostsilenec
Hello,

I would like to thank you to Duncho with all his help and support for our Local or here UK Community ;)

Finally today arrived and installed his SS fix, took me while to install it but totally worth it.

Some photos and youtube video attached.

https://www.youtube.com/watch?v=N5Vb_rhBFhg

Cheers guys!

Re: Project: Reversing / Disabling Stop/Start feature

Posted: Wed Aug 03, 2016 5:52 am
by LucLisette
To disable s/s, just open the hood and turn the hoodsensor 90°. No other action are needed and it works just fine.

Re: Project: Reversing / Disabling Stop/Start feature

Posted: Wed Aug 03, 2016 7:21 am
by frostsilenec
yeah and you will have errors in ECU and alarm will be not working properly, great tip which we were already know.

Re: Project: Reversing / Disabling Stop/Start feature

Posted: Thu Aug 11, 2016 1:09 pm
by Essexeddie
Halfway though fitting mine but have two black/white wires from the switch and no plain black. Which do I connect to? Mine is a RHD so the fuse box is on the opposite side of the cab.
Oops just fed along the wires and found that they join further up. So will join there.

Re: Project: Reversing / Disabling Stop/Start feature

Posted: Thu Aug 11, 2016 1:51 pm
by Essexeddie
Right I managed to connect the black wire now. Instructions tell me to connect the white wire from the modul to the red wire on the switch but I only have a blue wire on the modul so I connected that.
Now when I turn on the ignition I get a message on the dash ' warning key system fault' and the self start switch stays illuminated ?
I'm beginning to wish I hadn't started all this.

Re: Project: Reversing / Disabling Stop/Start feature

Posted: Thu Aug 11, 2016 4:41 pm
by frostsilenec
SS chip black to this black ( which is next to empty and then red )
SS chip white or blue to red ( only one on connector )
SS chip red to the 12V source

Re: Project: Reversing / Disabling Stop/Start feature

Posted: Thu Aug 11, 2016 4:54 pm
by Essexeddie
I did that in the end but I get the stop/start symbol on the dash flashing all the time. and the SS switch light just stays on no matter what I do? I thought you could just turn it off or on with the Modul fitted.