Retrofit satnav

ICE, Equipment, Options
Post Reply
Rickys666
Posts: 2
Joined: Sun Apr 24, 2016 6:46 pm

Post by Rickys666 »

Hi. I have managed to get my hands on a satnav unit from a right off 2014 car. I am intending to fit it to my car also a 2014 model in place of the standard fitted radio. I have been told that I will have to get it recoded by a Nissan dealer also that the cable harness will have to be replaced from the steering wheel to the unit. I would also like to fit the reversing camera in the near future. Has anybody tried this? If so any advice would be gratefully received. I know there have been comments on how bad the satnav is. Is this still true even with updates.

User avatar
Gel
Posts: 3265
Joined: Thu May 22, 2014 12:02 pm
Location: Thames Valley UK
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by Gel »

Use the private message system on this forum and ask "Black_Rojer": :o

memberlist.php?mode=viewprofile&u=2014

He sells various Connect units and will know the score
2014-19 J11A-14 1.5dci Ink Blue Tekna owner; now departed for a Mazda CX-5 GT Sport Nav, 2.0L Petrol :D
Black_Rojer
Posts: 150
Joined: Wed Feb 18, 2015 5:55 am
Location: Russia
Contact:

Post by Black_Rojer »

1. The new Nissan Connect LCN2 locked for car immobilizer. If you do not perform the unlock, the device will not work full. It will work with restrictions. 20 minutes and off. Unlocking can make the dealer. But not every dealer is able to do so. The dealer should know and be able to. This is possible when using Consult 3 (change SW). Or you just need to buy an pre-unlocked Connect. Prepared for sale. I only sell unlocked.
2. You will also need a mounting adapter. For installation in cars, where NOT previously was Nissan Connect. This will not change the wiring in the car. Using an adapter, you can install the new Connect in "lower complete" car. But you need a specialist car electrician.
The connectors are different. In your car no upper white socket, as Nissan Connect.
See the picture - http://www.fpro.aaanet.ru/connect/images/lcn2-6b.jpg
To top white connector mounting adapter is needed. I have a photo adapter. Later I'll show pict, if needed.
3. Yes, I sell the latest maps for this system. You can buy them from me cheaper than the dealer or on Ebay.
iceman GR
Posts: 74
Joined: Sat Nov 29, 2014 3:13 pm

Post by iceman GR »

So, if I replace my connect system with an after market one and then sell my old set to another QQ owner, the old set will need unlocking in order to function properly in the new QQ?
Qashqai 1,5, Acenta Premium, Black, Chrome Premium Pack, Side Chrome, Roof Rails (11/2014) SOLD 1/2017
Black_Rojer
Posts: 150
Joined: Wed Feb 18, 2015 5:55 am
Location: Russia
Contact:

Post by Black_Rojer »

iceman GR wrote:So, if I replace my connect system with an after market one and then sell my old set to another QQ owner, the old set will need unlocking in order to function properly in the new QQ?
Yes, it's 100% right for Nissan Connect.
mariom79
Posts: 7
Joined: Mon Apr 17, 2017 8:59 pm
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by mariom79 »

Hi. What is the right procedure in order to unlock the unit ? I need the pin code or this can be done only with "consult" software ?
Do you have a picture of the adapter ?
My dealer say that is not problem, but he doen't' know the right procedure.

Please let me know.

Mario.
User avatar
MikeGC
Posts: 1881
Joined: Tue Feb 07, 2017 11:50 am
Location: Stockport
Qashqai Model: Mk.3 Qashqai - J12 (2021+) New Model

Post by MikeGC »

Rickys666 wrote: Sun Apr 24, 2016 9:15 pm I know there have been comments on how bad the satnav is. Is this still true even with updates.
Apart from a very few missing new roads my sat nav has been faultless over the last 6000 miles
March '22 - J12 1.3DIG-T 160 CVT Tekna+ with all wheel drive - Pearl Black
July '19 - J11B 1.3DIG-T 160 DCT Tekna - Vivid Blue
March '17 - Qashqai J11A 1.5dci n-connecta - gunmetal
September '14 - Juke 1.5dci gunmetal ascenta premium (red accent packs)
Post Reply