Nissan QashQai Forums

I seem to have lost the speed indicator between the two dials on the dashboard.
I have gone through all the settings but can't seem to see anything that looks like what I need to turn on. Does anyone know where it is? Thanks.

If I'm not mistaken it between the current mpg bar and the compass

I'm sorry I haven't a clue what you mean. I need to know where I can find it in the control adjustments so I can turn it back on.

As far as I'm aware you can't switch it off . use the up and down switch on the left hand side or the steering wheel go up or down its between the fuel economy display and the settings display

See if this helps you - Dave

I never had it before I took the car into the main agents for some work. I quite liked it. I lost it when I had to alter a few preferences in the control. I have searched all through but can't find how to turn it back on.

I do know how to get into the settings. I just can't find the digital speed indicator.

Scroll through the displays using the rocker button on the left side of tye steering wheel...number 2 on Daveberlins diagram above.

Try again:

[Contents selection]:
The items that display when the ignition switch is
placed in the ON position can be enabled/disabled.
To change the items that are displayed, use the
or buttons to scroll and the ENTER button to
select a menu item: The following items (where fitted)
are available in the [Meter Settings] menu:
• [Home]
• [Average speed]
• [Trip]
• [Fuel economy]
• [Navigation] (where fitted)
• [Traffic Sign] (where fitted)
• [Audio]
• [Driving aids] (where fitted)
• [Tyre pressures]
• [Driver Attention] (where fitted)
• [Chassis control]
The [Driving Aids] option has a sub-menu, from
which you can choose whether or not to have further
items displayed. These items are:
• [Lane] (Lane Departure Warning system)
• [Blind Spot] Blind Spot Warning system)
• [Emergency Brake] (Forward Emergency Braking
system)


Select [Average speed] - I agree that's not obvious.

[Speed] and [Average speed] (km/h
or MPH)
The (digital) speed shows the current speed at
which the vehicle is travelling.
The average speed mode shows the average vehicle
speed since the last reset. Push the ENTER
switch for longer than 1 second to enter the Reset
menu.
The display is updated every 30 seconds. The first
30 seconds after a reset, the display shows “——”.

I'm also not sure whether it changes to KPH if you need it to. Might if you set fuel consumption to? But I can't find it explicitly in the manual.

As already said:

Settings
Display Settings
Contents Selection
Average speed - check