Forward collision Sensor

ICE, Equipment, Options
redqashqai
Posts: 66
Joined: Wed Aug 24, 2016 7:16 pm
Location: North West England
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–present)

Re: Forward collision Sensor

Post by redqashqai » Wed Aug 31, 2016 6:41 pm

Just had a call at 18.10 to confirm that fault is fixed. Picked up car and everything seems fine.

Warranty repair report - checked fuses and battery OK. Followed ESM fault finding and powered vehicle down to reset. Repowered and got error code U1000 can fault. Found no communication from lane camera. Check camera connections and wiring all OK. Internal defect. Replaced camera and set up with consult, removed all DTC's and tested, ok.

Camera Assy-L £1044.22 less 15% = £887.59
Labour £75.45
VAT £0.00
Total £963.04
Current: 2018 1.2 DIG-T QQ N-Connecta (Pano Roof) - Manual J11b - Magnetic Red - delivered 09.18.
Previous: 2016 1.2 DIG-T QQ N-Connecta - Manual J11a - Flame Red - delivered 04.16.

User avatar
Hound
Posts: 1160
Joined: Tue May 19, 2015 12:37 am
Location: Hope Mountain, North Wales

Re: Forward collision Sensor

Post by Hound » Wed Aug 31, 2016 7:49 pm

U1000 - a CANBUS communication circuit error. That camera would be quite an expensive piece of car to replace if not under warranty!

Hope it's fully sorted now.
Image
2015 1.6dCi 130 Xtronic N-tec+ in Gun Metallic

redqashqai
Posts: 66
Joined: Wed Aug 24, 2016 7:16 pm
Location: North West England
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–present)

Re: Forward collision Sensor

Post by redqashqai » Thu Sep 01, 2016 11:29 am

Yes, everything is fine thanks. If out of warranty the retail price of the Driving Aids Camera Assembly is £1044.22 + VAT + Labour.
Current: 2018 1.2 DIG-T QQ N-Connecta (Pano Roof) - Manual J11b - Magnetic Red - delivered 09.18.
Previous: 2016 1.2 DIG-T QQ N-Connecta - Manual J11a - Flame Red - delivered 04.16.

redqashqai
Posts: 66
Joined: Wed Aug 24, 2016 7:16 pm
Location: North West England
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–present)

Re: Forward collision Sensor

Post by redqashqai » Thu Sep 01, 2016 6:05 pm

Just a shout out to Neo29. our friend in Belgium - the original poster in this thread. Have you taken the car to the dealer? Is your problem with the safety shield still occassional?
Current: 2018 1.2 DIG-T QQ N-Connecta (Pano Roof) - Manual J11b - Magnetic Red - delivered 09.18.
Previous: 2016 1.2 DIG-T QQ N-Connecta - Manual J11a - Flame Red - delivered 04.16.

Golfdogblack
Posts: 7
Joined: Tue Aug 25, 2020 4:01 pm
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–present)

Re: Forward collision Sensor

Post by Golfdogblack » Fri Sep 04, 2020 12:59 pm

I have a new quashqai and I don’t think my forward collision is working even though I get no message to say it’s failed . I have tried to leave breaking till late to see if I get the first notification but get nothing

User avatar
calnorth
Posts: 1576
Joined: Mon Feb 11, 2019 2:01 pm
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–present)

Re: Forward collision Sensor

Post by calnorth » Fri Sep 04, 2020 1:30 pm

Its rather shocking pricewise as below is the camera. Ebay scrappy used for £95 - 2017 model. Am sure its Made in China as I saw it somewhere else from the rear. Mounted behind grille low down.

There's some Consult procedure: (diagnose/test/setup). Consult leads the way

X- Y axis and Rotate calibration
Image check

s-l1600 (1).jpg

Thankfully unbusy (retired)
Mk2 Qashqai Facelift - J11b (2017–present)
1.6 Dig-T N-Connecta

Golfdogblack
Posts: 7
Joined: Tue Aug 25, 2020 4:01 pm
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–present)

Re: Forward collision Sensor

Post by Golfdogblack » Sat Sep 05, 2020 12:08 pm

I don’t have any indication that my collision avoidance is working but I don’t think it is as I have tried to leave breaking as late as possible to prove it works but I get no alarm to say I need to break. Any one know how I can prove if it’s working or not

User avatar
calnorth
Posts: 1576
Joined: Mon Feb 11, 2019 2:01 pm
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–present)

Re: Forward collision Sensor

Post by calnorth » Sat Sep 05, 2020 12:31 pm

Golfdogblack wrote:
Fri Sep 04, 2020 12:59 pm
I have a new quashqai and I don’t think my forward collision is working even though I get no message to say it’s failed . I have tried to leave breaking till late to see if I get the first notification but get nothing
You cannot test it other than ram it into another vehicle. If its a new car take it to the dealer and ask them to demonstrate the function.
Thankfully unbusy (retired)
Mk2 Qashqai Facelift - J11b (2017–present)
1.6 Dig-T N-Connecta

Post Reply