Which battery replacement for QQ+2 (2010) 2.0 Dci ?

ICE, Equipment, Options
Post Reply
tnissko
Posts: 13
Joined: Tue Jun 06, 2017 3:25 pm
Qashqai Model: Mk.1 Qashqai - J10 (2006–2013)

Post by tnissko »

The battery has died and RAC couldn't replace it, they said the replacement wasn't tall enough (they tried to fit this one - https://www.racshop.co.uk/rac002-premiu ... ttery.html )

The one which is fitted is original Japanese battery which seems to be a bit taller with terminals on the very top, the dimensions are roughly 270x170x200. Old vs RAC: http://prntscr.com/fgm0dy

All shops that I've checked so far recommend 096 battery with these dimensions: 278x175x190 which is exactly the same as the Rac's one. All of them also have terminals in pockets rather than on the top.

e.g.
http://www.ebay.co.uk/itm/201180901480? ... EBIDX%3AIT
https://advancedbatterysupplies.co.uk/b ... t-qashqai/

I am so confused, if 096 does not fit where do I get a replacement, couldn't find any hints in internet.
Surely I am not the first QQ owner facing this issue.
Any advice is much appreciated.
Last edited by tnissko on Tue Jun 06, 2017 5:39 pm, edited 1 time in total.

DaveBerlin
Posts: 8623
Joined: Wed Mar 19, 2014 12:39 pm
Location: Berlin, Germany
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by DaveBerlin »

Are you sure you have posted the correct facts because the QQ J10 was first introduced in 2006 not 2000, so is the date wrong or is it another Nissan Model ? - Dave ;)
11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken
tnissko
Posts: 13
Joined: Tue Jun 06, 2017 3:25 pm
Qashqai Model: Mk.1 Qashqai - J10 (2006–2013)

Post by tnissko »

2010 that is, time flies fast :)
tnissko
Posts: 13
Joined: Tue Jun 06, 2017 3:25 pm
Qashqai Model: Mk.1 Qashqai - J10 (2006–2013)

Post by tnissko »

In case someone faces same issue in the future - went to Halfords and they fitted standard 096 just fine. The wall with attached + connection is actually flexible and can be adjusted to be lower. Can't believe RAC engineer spent more than 1 hour and still failed to install it.
User avatar
Gel
Posts: 3265
Joined: Thu May 22, 2014 12:02 pm
Location: Thames Valley UK
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by Gel »

hopefully was cheaper for you too :)
2014-19 J11A-14 1.5dci Ink Blue Tekna owner; now departed for a Mazda CX-5 GT Sport Nav, 2.0L Petrol :D
tnissko
Posts: 13
Joined: Tue Jun 06, 2017 3:25 pm
Qashqai Model: Mk.1 Qashqai - J10 (2006–2013)

Post by tnissko »

RAC wanted £150, Halfords £100 fitted, and £50 on eBay if I knew it would definitely fit.
Post Reply