iKey Programming \ ODB Programming

ICE, Equipment, Options
Post Reply
Neil2014Qashqai
Posts: 7
Joined: Tue Jul 18, 2017 7:41 am
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by Neil2014Qashqai »

Trying to scour the net to find a obd programmer for the Qashqai J11 2014 so that i can program new blank ikey\smart keys?

Has anyone or DIYers used any such devices

I heard\read the F102 OBD programmer is able to do this, but not sure if it will work on qashqai's

Any thoughts??

Not keen in paying over priced charges to main dealers for programming a blank key.

Neil2014Qashqai
Posts: 7
Joined: Tue Jul 18, 2017 7:41 am
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by Neil2014Qashqai »

Anyone??
gvmdaddy
Posts: 2245
Joined: Thu Jun 19, 2014 11:28 pm

Post by gvmdaddy »

Where do you plan on buying your new blank ikey from?
A quick search suggests that vendors require your car to be present and they have to do it for you.
User avatar
Gel
Posts: 3265
Joined: Thu May 22, 2014 12:02 pm
Location: Thames Valley UK
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by Gel »

See
2014-19 J11A-14 1.5dci Ink Blue Tekna owner; now departed for a Mazda CX-5 GT Sport Nav, 2.0L Petrol :D
Neil2014Qashqai
Posts: 7
Joined: Tue Jul 18, 2017 7:41 am
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by Neil2014Qashqai »

Gel wrote: Thu Aug 03, 2017 10:48 am See
cant see your post...
Neil2014Qashqai
Posts: 7
Joined: Tue Jul 18, 2017 7:41 am
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by Neil2014Qashqai »

gvmdaddy wrote: Thu Aug 03, 2017 7:27 am Where do you plan on buying your new blank ikey from?
A quick search suggests that vendors require your car to be present and they have to do it for you.
I have the blanks from "China" (aliexpress) which has the same numbers, frequency, security etc...

I was hoping to buy a programmer if not expensive... i seen some youtube vids which uses zedbull and requires car to be present... and i was hoping something along these lines unless its too expensive...

i heard Timpsons key cutting shop does it at selected locations, "Biliricay\Essex". I might ask them...

but thought if anyone on here has done anything like this previously, then i'm competent doing it...
User avatar
Gel
Posts: 3265
Joined: Thu May 22, 2014 12:02 pm
Location: Thames Valley UK
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by Gel »

If you can't see the YouTube preview, something in your browser settings is causing; try another browser.
2014-19 J11A-14 1.5dci Ink Blue Tekna owner; now departed for a Mazda CX-5 GT Sport Nav, 2.0L Petrol :D
Neil2014Qashqai
Posts: 7
Joined: Tue Jul 18, 2017 7:41 am
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by Neil2014Qashqai »

Gel wrote: Thu Aug 03, 2017 2:22 pm If you can't see the YouTube preview, something in your browser settings is causing; try another browser.
got it mate... silly chrome...

yeah that the one i mentioned above, zedbull is one of the programmers...costs $$$

looking for something cheap and cheerful and on DIY level....
gvmdaddy
Posts: 2245
Joined: Thu Jun 19, 2014 11:28 pm

Post by gvmdaddy »

I dont understand why youve already bought blanks from China without first finding out if it will be something you can actually do yourself at little cost!
Neil2014Qashqai
Posts: 7
Joined: Tue Jul 18, 2017 7:41 am
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by Neil2014Qashqai »

gvmdaddy wrote: Thu Aug 03, 2017 2:49 pm I dont understand why youve already bought blanks from China without first finding out if it will be something you can actually do yourself at little cost!
They were cheap. I was being ambiguous.
I thought if I have the keys already, going to third party will make it little cheaper.
Post Reply