Hi @duncho, I've stumbled upon this thread as my partner's qashqai's connect began restarting itself. It comes up with "initialising..." etc, and "copying files", then "failed". Like a bootloop of sorts but after reading this thread i guess it's trying to update itself!
Not sure why the above occurred, but I would like to try and reflash the unit to see if that fixes the issue, is that worthwhile?
Could you just confirm that this firmware you posted D554 is ok to install over D302? I've attached a picture of the current version. Also from reading the thread i assume there is no D302 firmware available anywhere?
Many thanks.
FIRMWARE VERSION
Yes it is. My NC was also D302. All LCN2kai units are equal.
Last edited by duncho on Fri Mar 16, 2018 9:21 pm, edited 1 time in total.
Qashqai J11, 1.6 dCi CVT, ThermaClear
For latest news & tests Subscribe! to my Youtube channel
Order Stop/Start reversing & DRL dim/OFF modules!
For latest news & tests Subscribe! to my Youtube channel
Order Stop/Start reversing & DRL dim/OFF modules!
Worked, thanks for the guide and comments that helped me get there.
Question is now, why did this happen in the first place? Could i literally be as simple as that there are very few linux users really (I am one), and the music i put onto a USB stick for my partner, the USB stick may have had remnants of a linux OS?
The scenario above is very probably as I always have USBs with OS's on them, and most likely one was used for the music.
Question is now, why did this happen in the first place? Could i literally be as simple as that there are very few linux users really (I am one), and the music i put onto a USB stick for my partner, the USB stick may have had remnants of a linux OS?
The scenario above is very probably as I always have USBs with OS's on them, and most likely one was used for the music.
I wouldn't mix (probably confuse NC) the content on USB stick that you use in the car. Buy one specifically for car/music only. It isn't big investment. Also, having tons of files and not recognizable files on the drive push NC to run indexing each time the car is started.
Qashqai J11, 1.6 dCi CVT, ThermaClear
For latest news & tests Subscribe! to my Youtube channel
Order Stop/Start reversing & DRL dim/OFF modules!
For latest news & tests Subscribe! to my Youtube channel
Order Stop/Start reversing & DRL dim/OFF modules!
- d0Min_uS
- Posts: 88
- Joined: Sun Jan 21, 2018 8:26 pm
- Location: Romania
- Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)
Hello,
I want to update mine too. I have a question: It's ok to update with the engine started, S&S disabled and not drive/move the card about 1 Hour?
I don't have the charger to connect on the car battery and garage to let the car with hazard on and open windows for one hour. .
Thanks!
I want to update mine too. I have a question: It's ok to update with the engine started, S&S disabled and not drive/move the card about 1 Hour?
I don't have the charger to connect on the car battery and garage to let the car with hazard on and open windows for one hour. .
Thanks!
Qashqai Tekna 1.6 dci CVT X-Tronic (J11-2014) color: Black - Z11, engine: R9M 2WD
I did update of mine while driving home from work.
Qashqai J11, 1.6 dCi CVT, ThermaClear
For latest news & tests Subscribe! to my Youtube channel
Order Stop/Start reversing & DRL dim/OFF modules!
For latest news & tests Subscribe! to my Youtube channel
Order Stop/Start reversing & DRL dim/OFF modules!
- d0Min_uS
- Posts: 88
- Joined: Sun Jan 21, 2018 8:26 pm
- Location: Romania
- Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)
So it's ok to update fallow your step from previous post with the engine running?
I will need to remove the map SD card or not?
Thanks guys!
Qashqai Tekna 1.6 dci CVT X-Tronic (J11-2014) color: Black - Z11, engine: R9M 2WD
Start the engine and do not switch it off while upgrade process is running. You can also drive while upgrade is in process and also keep SD card inside the slot.
Qashqai J11, 1.6 dCi CVT, ThermaClear
For latest news & tests Subscribe! to my Youtube channel
Order Stop/Start reversing & DRL dim/OFF modules!
For latest news & tests Subscribe! to my Youtube channel
Order Stop/Start reversing & DRL dim/OFF modules!