FIRMWARE VERSION

[Iandee]

That’s exactly what I’m getting. With or without the SD.
Later 3rd January
I’ve just been to local dealers Toomey’s Southend. were I bought car. Describe the fault and was about to say that I had heard on this forum that ...... but he finished it of with exactly what I had experienced. He said it was a known fault. Needed to go to car to check what version I had. (Didn’t say what) but then agreed it would be sorted out. Said it was the DAB problem, when it gets too many messages it locks up. (Didn’t have a clue what he meant. I don’t use the radio etc!) Booked in take car in next week. Will take 1 1 & 1/2 to 2hours.

[andy2019]

update takes 50 mins to install, engine should be running (thats what i did when i did update on mine) went for a nice drive.
these are the files you should have on the usb stick to update....

SpecialLogDirX
_content.md5
container.iso.bin
custver.reg.bin
force.dnl
initramfs.bin
lx001.tar.gz.bin
manifest
manifest.mnf
manifest.smd
reg_eur.tar.gz.bin
reg_gom.tar.gz.bin
reg_nar.tar.gz.bin
triton_mid.bin
uimage.bin

[m21usm]

This is my process. I have the engine running, sound off, Bluetooth disconnected, S/S off, lights on AUTO position. I insert the USB and open the hidden menu and go through the process only to face the “insert media” stage.

I’m using a FAT format 4GB USB, (also have used FAT32 but I can’t get to the screen after I press update). Should I use FAT or FAT32 ?

My hazards are off and my windows are all up. I have nothing in the SD slot and nothing is using the 12V socket either.

[andy2019]

This is my process. I have the engine running, sound off, Bluetooth disconnected, S/S off, lights on AUTO position. I insert the USB and open the hidden menu and go through the process only to face the “insert media” stage.

I’m using a FAT format 4GB USB, (also have used FAT32 but I can’t get to the screen after I press update). Should I use FAT or FAT32 ?

My hazards are off and my windows are all up. I have nothing in the SD slot and nothing is using the 12V socket either.

it`s fat32 format for the usb stick i used a 16gb stick but 8gb should be fine. try a bigger usb than a 4gb, did you uncompress the files from the download so that you have the same files as as i listed earlier on your usb stick...

[m21usm]

Yes, I have exactly the same files and even the file sizes too . I’m now re formatting to FAT32 (not quick format) and going to decompress the zip file again onto the USB stick and try again tomorrow

[andy2019]

Yes, I have exactly the same files and even the file sizes too . I’m now re formatting to FAT32 (not quick format) and going to decompress the zip file again onto the USB stick and try again tomorrow

thats great then, try a larger usb stick aswell like 8gb just incase 4gb usb stick don`t have enough spare room left on it for the nissan system to add files while updateing

[m21usm]

Yep, got a 16GB I’m going to try too

[m21usm]

Seems like it was the USB stick. My advise is to use a USB stick bigger than 4GB and it was FAT32.

[andy2019]

Seems like it was the USB stick. My advise is to use a USB stick bigger than 4GB and it was FAT32.

Glad it's all sorted for you let the updateing begin

[rolledstone]

Just successfully updated to the latest firmware version using the software provided on this thread. Surprised how easy it was to do.

Thanks to whoever provided the firmware.