FIRMWARE VERSION

ICE, Equipment, Options
Post Reply
andy2019
Posts: 1787
Joined: Sat Oct 26, 2019 8:47 pm
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by andy2019 »

plaza7 wrote: Wed Jul 01, 2020 4:46 pm Some Dutch QQ owners upgraded to D605, afterwhich the radio doesn't turn off anymore when opening the left door and leaving the car. I upgraded mine to D554 instead.
the radio will turn off after 10 mins if door has been open or not ;)

jurasjo
Posts: 5
Joined: Wed Feb 19, 2020 9:16 am
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by jurasjo »

andy2019 wrote: Wed Jul 01, 2020 9:39 pm
plaza7 wrote: Wed Jul 01, 2020 4:46 pm Some Dutch QQ owners upgraded to D605, afterwhich the radio doesn't turn off anymore when opening the left door and leaving the car. I upgraded mine to D554 instead.
the radio will turn off after 10 mins if door has been open or not ;)
I have updated to the D605 and the radio is turning off normally.
plaza7
Posts: 7
Joined: Sun Jun 21, 2020 10:25 am
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by plaza7 »

jurasjo wrote: Fri Jul 03, 2020 5:18 am
andy2019 wrote: Wed Jul 01, 2020 9:39 pm
plaza7 wrote: Wed Jul 01, 2020 4:46 pm Some Dutch QQ owners upgraded to D605, afterwhich the radio doesn't turn off anymore when opening the left door and leaving the car. I upgraded mine to D554 instead.
the radio will turn off after 10 mins if door has been open or not ;)
I have updated to the D605 and the radio is turning off normally.
With a left hand driver model? That would be good :)
jurasjo
Posts: 5
Joined: Wed Feb 19, 2020 9:16 am
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by jurasjo »

Yes, LHD car
plaza7
Posts: 7
Joined: Sun Jun 21, 2020 10:25 am
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by plaza7 »

Ok nice. Have you had D554 before? I wonder what kind of improvements there are with D605.
jurasjo
Posts: 5
Joined: Wed Feb 19, 2020 9:16 am
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by jurasjo »

Yes, I had D554. I have also no idea what that firmware was suppose to improve.
Jazzalaa
Posts: 4
Joined: Thu Jul 16, 2020 8:33 pm
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by Jazzalaa »

Sorry to jump on this late, I have read through the thread but a little confused. I have just bought a 68 plate QQ N-Connecta and the connect unit in it is the same as the one in my pulsar, but the background was blue not black. So it’ seems it’s a newer version but not new enough as in my fathers 19 plate QQ (with apple car play). Is there a way to upgrade to include CarPlay?!

Sorry if I’ve completely missed it in the thread but all the software versions confused me!
karhulitos
Posts: 5
Joined: Thu Apr 11, 2019 3:54 pm
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by karhulitos »

karhulitos wrote: Fri Apr 12, 2019 4:38 pm
duncho wrote: Fri Apr 12, 2019 4:24 pm Do I understand well that you brought it to Nissan dealer for upgrade and they screw it up?
Yes. Or as I see it:
- they screw it up OR
- NC just had a hw failure when they tried the update (yeah, right)

The NC up/radio on - NC up/radio silent - NC reboot behavior started roughly a month ago. First I thought it was my phone bluetooth caused it but unpairing didn't help (wife's iPhone still had connection established). As the reboot cycles continued, and I think radio on -cases became more rare, I told her to take it to the garage. After that we've only seen bootloader and update attempts. Garage said system failed, no warranty, no joy.
What can we say except to bite lip? Best case some 50/50 split deal. No way. :evil:
Hi, sorry to reply on a very old post.

The story continues and today the unit was dismounted as I promised to my wife to peek inside to see if the failure (Update failed, COMMAND: script.lua:281 remoteExec) indeed was hardware related. And yes, it was. A chip, STA662 was burned and, according to the almighty Internet, it is responsible of radio and most audio tasks, and more importantly, is reprogrammable. Perfect root cause for the update failure.

Radio did fail before the whole box was bricked with garage's update attempt. So it wasn't shop's fault but the unit itself.

Albeit I can solder I couldn't even find or see any (home) means to replace the chip. So next step is: another unit from eBay.
Rastafara
Posts: 3
Joined: Mon Jul 27, 2020 5:25 pm
Qashqai Model: Mk.3 Qashqai - J12 (2021+) New Model

Post by Rastafara »

I have an Xtrail (T32) with firmware version D010 (I know, vintage) and hardware version 31.

I have just joined but have read the whole Firmware thread, downloaded the firmware on page 44 and loaded it on a fully formatted FAT32 8GB USB drive. (4.5 GB free space left)

The update starts but fails after initializing.
At the start it says updatable data identified, onboard version is 010, media version is XXXX.

I would be grateful for help with the following questions:

Is hardware 31 working with firmware D605?
Why is the system not able to identify the firmware version on the USB drive (media version)?
Is this the reason why it fails? What can I do?
Do I need to take an intermediate step to get from 010 to 605?
Is it an issue that for the time being I do not have an SD card in the slot?

Thank you very much in advance for any hints to solving the issue.
andy2019
Posts: 1787
Joined: Sat Oct 26, 2019 8:47 pm
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by andy2019 »

think you may find that the firmware update isn`t for your system thats why it won`t upgrade
Post Reply