Connect units with software level starting with F should not be updated with D level software as this will cause issues with the connect unit and you cant go back to F software so will have to have a new unit.
LCN2KAI are D software levels
LCN2KAI EVO are F software and are installed on k14, j11 U2 chassis and d23.
FIRMWARE VERSION
-
- Posts: 336
- Joined: Sat Feb 23, 2019 7:27 am
- Qashqai Model: Mk.3 Qashqai - J12 (2021+) New Model
-
- Posts: 6
- Joined: Fri Oct 13, 2017 1:02 pm
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
F16A is there somewhere for free download ?? Link please.lewisbryant wrote: ↑Sat May 02, 2020 1:59 pm Connect units with software level starting with F should not be updated with D level software as this will cause issues with the connect unit and you cant go back to F software so will have to have a new unit.
LCN2KAI are D software levels
LCN2KAI EVO are F software and are installed on k14, j11 U2 chassis and d23.
It isn’t available even for Nissan dealerships, you will need to wait until it becomes available, if at all. BOSCH release new updates only if there is some bug identified.
Qashqai J11, 1.6 dCi CVT, ThermaClear
For latest news & tests Subscribe! to my Youtube channel
Order Stop/Start reversing & DRL dim/OFF modules!
For latest news & tests Subscribe! to my Youtube channel
Order Stop/Start reversing & DRL dim/OFF modules!
-
- Posts: 6
- Joined: Fri Oct 13, 2017 1:02 pm
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
to put Chinese multimedia then? I was with F16A but I updated with D502 since then I have no backlight on the buttons and it does not extinguish automatically by removing the key from the socket.
Help I have a J11 QQ 2014 1.2 PETROL my connect unit started turning off and off. Sat nav wouldn't work or radio. spoke to a Nissan dealer and was told know issue we have a free update. So took to nissan dealer today for a the update and after 2hrs of waiting turns out still not working. Not sure how put photos on but when comes on now says update has current version as xxxx media version NAV_13.2C5PO6R1. Press update gets to 35% then restarts. Any ideas thanks
Rds1 check once again what firmware version do you have
Qashqai J11, 1.6 dCi CVT, ThermaClear
For latest news & tests Subscribe! to my Youtube channel
Order Stop/Start reversing & DRL dim/OFF modules!
For latest news & tests Subscribe! to my Youtube channel
Order Stop/Start reversing & DRL dim/OFF modules!
-
- Posts: 336
- Joined: Sat Feb 23, 2019 7:27 am
- Qashqai Model: Mk.3 Qashqai - J12 (2021+) New Model
I've had one that comes up with update you need the USB drive with the update on before the radio boots up. If you cant get it to to restart disconnect the car battery and reconnect then it will reboot and update should go through that's if it is below the latest level of D605
Access the SERVICE MENU.
a. Push and hold the APPS button.
b. Turn the TUNE-SCROLL knob as follows:
c. Counterclockwise 3 or more clicks, then
d. Clockwise 3 or more clicks, then
e. Counterclockwise 3 or more clicks, then
f. Clockwise 3 or more clicks, then
g. Repeat the above turns until the SERVICE MENU screen is displayed