FIRMWARE VERSION

ICE, Equipment, Options
Post Reply
duncho
Posts: 1672
Joined: Sun Mar 23, 2014 9:45 pm
Contact:

Post by duncho »

Before updating Nissan Connect with D554 software, I recommend to check the file for completeness to avoid any failures during update process.
Install hashtab extension first if you have no other way how to read the file checksum:
https://www.softpedia.com/get/System/Fi ... hTab.shtml

Download D554 software (I recommend by fast download option which takes about 15min): https://ulozto.net/!8t5eNPZRAvF9

1. speed.PNG

Check checksum of the file which should be:
CRC32: 8ED40F7D
MD5: 8ACBAE4A0DA267BDCE83DAF4FF952AB0
SHA-1: BBA87DCC70C00D103EC8E5A30344A878DE6C63F8

3. chksum.PNG

2. size.png

Proceed with the update following Nissan Connect update instructions.
Qashqai J11, 1.6 dCi CVT, ThermaClear

For latest news & tests Subscribe! to my Youtube channel
Order Stop/Start reversing & DRL dim/OFF modules!

MSS636
Posts: 8
Joined: Tue Mar 05, 2019 7:48 pm
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by MSS636 »

Thanks to everyone on this.

Unfortunately I still have the same issues with dropping bluetooth, radio and music. I've checked and I do have the software installed son I'm guessing my issue is hardware. EBay it is then..... :)
daftbadger
Posts: 10
Joined: Sat Mar 09, 2019 10:28 am
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by daftbadger »

Thanks for the info duncho. The downloaded zip checksout ok with the hash.
Going to download and try again but I’m not holding out much luck.
daftbadger
Posts: 10
Joined: Sat Mar 09, 2019 10:28 am
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by daftbadger »

Just redownloaded the file (from https://ulozto.net/!8t5eNPZRAvF9) and the MD5 checks out with the same one you provided.

MD5 = 8ACBAE4A0DA267BDCE83DAF4FF952AB0

I fully formatted a new 16Gb FAT32 USB drive and copied extracted the .zip contents to it.
After starting the car's engine, activating the hazard lights, rolling down the window and disabling Start/Stop I started the update process.

The drive is recognised and the system sees the USB as having a newer version. On reboot of the head-unit it tries to "Initialise" but then fails after doing nothing for roughly 2 minutes. No files copy or start to copy. The head unit then says that it is shutting down and reboots into normal operation.

Image
duncho
Posts: 1672
Joined: Sun Mar 23, 2014 9:45 pm
Contact:

Post by duncho »

Try another USB drive
Qashqai J11, 1.6 dCi CVT, ThermaClear

For latest news & tests Subscribe! to my Youtube channel
Order Stop/Start reversing & DRL dim/OFF modules!
daftbadger
Posts: 10
Joined: Sat Mar 09, 2019 10:28 am
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by daftbadger »

duncho wrote: Sun Mar 10, 2019 4:39 pm Try another USB drive
Ok, so I tried a new 8Gb USB this time. The same procedure of format and Unzip the files onto it.
The head-unit recognises the drive when I jump into 'update software' on the service menu.

What I have noticed is that when the unit reboots to start the update it stops completely reading the USB drive, the activity lights on the drive stop the moment it reboots into the update mode.

Could it be that my head-unit is faulty?

I never get past 'STATUS: Initialising . . .'
duncho
Posts: 1672
Joined: Sun Mar 23, 2014 9:45 pm
Contact:

Post by duncho »

Anything is possible. If you can’t run it, Nissan won’t be able too.

PS just think of your issue, could it be that you have set in file explorer “do not show hidden files and folders”? How to you extract and copy data from archive?
Qashqai J11, 1.6 dCi CVT, ThermaClear

For latest news & tests Subscribe! to my Youtube channel
Order Stop/Start reversing & DRL dim/OFF modules!
daftbadger
Posts: 10
Joined: Sat Mar 09, 2019 10:28 am
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by daftbadger »

duncho wrote: Sun Mar 10, 2019 5:50 pm Anything is possible. If you can’t run it, Nissan won’t be able too.

PS just think of your issue, could it be that you have set in file explorer “do not show hidden files and folders”? How to you extract and copy data from archive?
Ran them over using Linux command so everything is definitely copied.... I'm a Linux Admin so I am pretty used to these sort of tasks or issues but I just wondered if the Nissan Connect had any weird quirks.

Just to be on the safe side I have also completed this using a Windows PC and the result was the same.
duncho
Posts: 1672
Joined: Sun Mar 23, 2014 9:45 pm
Contact:

Post by duncho »

Well, then I don’t know. Try hard resetting your NC yet. If you don’t know how to, press and hold power button on NC untill you see Nissan logo.
Last edited by duncho on Sun Mar 10, 2019 7:10 pm, edited 1 time in total.
Qashqai J11, 1.6 dCi CVT, ThermaClear

For latest news & tests Subscribe! to my Youtube channel
Order Stop/Start reversing & DRL dim/OFF modules!
Pandjh
Posts: 770
Joined: Sat Feb 04, 2017 11:34 am
Location: South-East England
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by Pandjh »

Is ur USB key write-restricted? Not sure why that might matter though.
2019 1.3 DiG-T 160 Tekna, black (J11b)
prev 2015 1.2 DiG-T n-tec+, black (J11)
prev 2009 1.5 dCi Acenta, black (J10)
Post Reply