FIRMWARE VERSION

ICE, Equipment, Options
duncho
Posts: 1422
Joined: Sun Mar 23, 2014 9:45 pm
Contact:

Re: FIRMWARE VERSION

Post by duncho » Sun Dec 09, 2018 3:53 pm

send me PM including VIN of your car and your email
Qashqai J11, 1.6 dCi CVT, ThermaClear

For latest news & tests Subscribe! to my Image
Get your Stop/Start reversing & DRL dim/OFF modules here: Image


Ivan_Nieto
Posts: 4
Joined: Sun Dec 09, 2018 1:48 pm
Qashqai Model: Still looking for one....

Re: FIRMWARE VERSION

Post by Ivan_Nieto » Sun Dec 09, 2018 5:47 pm

Done

Enviado desde mi LG-H930 mediante Tapatalk



leguyanais
Posts: 3
Joined: Thu Jun 28, 2018 4:20 am
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Re: FIRMWARE VERSION

Post by leguyanais » Thu Jan 03, 2019 3:59 am

Hello everyone,

I come to you to know if I can upgrade my version.
If it is possible that it would be the manipulation to perform.
Thank you for your help

20190101_141544.jpg

20190101_141530.jpg



duncho
Posts: 1422
Joined: Sun Mar 23, 2014 9:45 pm
Contact:

Re: FIRMWARE VERSION

Post by duncho » Thu Jan 03, 2019 8:11 am

Nope, you have LCN2Kai EVO version (newer unit).
Qashqai J11, 1.6 dCi CVT, ThermaClear

For latest news & tests Subscribe! to my Image
Get your Stop/Start reversing & DRL dim/OFF modules here: Image


leguyanais
Posts: 3
Joined: Thu Jun 28, 2018 4:20 am
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Re: FIRMWARE VERSION

Post by leguyanais » Thu Jan 03, 2019 8:46 pm

duncho wrote:
Thu Jan 03, 2019 8:11 am
Nope, you have LCN2Kai EVO version (newer unit).

Thank you for your answer.

Will there be an update?
Is it possible to activate voice commands because they are disabled?


duncho
Posts: 1422
Joined: Sun Mar 23, 2014 9:45 pm
Contact:

Re: FIRMWARE VERSION

Post by duncho » Thu Jan 03, 2019 11:26 pm

leguyanais wrote:
Thu Jan 03, 2019 8:46 pm
Will there be an update?
Is it possible to activate voice commands because they are disabled?
Only Nissan knows
Qashqai J11, 1.6 dCi CVT, ThermaClear

For latest news & tests Subscribe! to my Image
Get your Stop/Start reversing & DRL dim/OFF modules here: Image


nickc78
Posts: 1
Joined: Wed Jan 09, 2019 11:20 pm
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Re: FIRMWARE VERSION

Post by nickc78 » Wed Jan 09, 2019 11:31 pm

AndyW wrote:
Fri Mar 23, 2018 7:36 pm
Hey all, any ideas what I’m doing wrong?
Hi,

I also got the error message that says "please use NissanConnect software download image only", any idea why? My stick USB is formatted Fat32 and I had the same folder structure in it as per the photo earlier in this thread and followed the instructions as per the guide. This message pops up almost immediately after hitting the update button.

Regards
Nick


robthg
Posts: 2
Joined: Thu Mar 15, 2018 8:14 pm
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Re: FIRMWARE VERSION

Post by robthg » Fri Jan 11, 2019 7:57 pm

If you want to update the firwarm whilst driving, the hazard lights have to be on?


duncho
Posts: 1422
Joined: Sun Mar 23, 2014 9:45 pm
Contact:

Re: FIRMWARE VERSION

Post by duncho » Fri Jan 11, 2019 8:24 pm

No need, engine needs to be on and must not be turned off. Switch S/S off!!!!
Qashqai J11, 1.6 dCi CVT, ThermaClear

For latest news & tests Subscribe! to my Image
Get your Stop/Start reversing & DRL dim/OFF modules here: Image


robthg
Posts: 2
Joined: Thu Mar 15, 2018 8:14 pm
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Re: FIRMWARE VERSION

Post by robthg » Fri Jan 11, 2019 8:54 pm

Thanks for the quick reply. Still unsure at which step i can start the motor, turn off hazard lights and drive...

1. Unzip file to blank USB stick.
2 For IKey vehicles press the start/stop button once to enter "Ignition On" mode. Lower the drivers window to the down position. Press the hazard light switch to "ON" position and ensure the hazard lights are activated.
3. Insert the USB memory stick
4. Press and hold the "Setup" button and then turn the "Enter" button a half turn anticlockwise, then a half turn clockwise, then a half turn anticlockwise. The service menu will then appear. Release the "Setup"
5. Press the "Version" button on the screen.
6. Press the 'Update System Software' button. ' Press 'OK'.
7. will state 'Download Media Found'. Press the 'Update' button on the Nissan Connect screen.
8. After a 5 minute period, the screen will become active and a "Reading Medium" message will appear.
9. After the reprogramming update has finished a message will appear stating "Please remove USB Stick. System is shutting down". Remove
the stick. The screen may remain on this screen for up to 5 minutes. This is normal DO NOT alter the ignition position.
10. Press the "Accept" button. The reprogramming operation is now complete.


Post Reply

Return to “Electronic systems”