Touchscreen problem

ICE, Equipment, Options
Post Reply
Mrhappy1919
Posts: 4
Joined: Tue Oct 16, 2018 2:28 am
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by Mrhappy1919 »

Hello,

please someone can help how to calibrate touchscreen in my nissan qashqai ? or there is a solution to reset the autoradio settings ?

Image

thank you

User avatar
Gel
Posts: 3265
Joined: Thu May 22, 2014 12:02 pm
Location: Thames Valley UK
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by Gel »

What needs recalibrating?
To access CONNECT hidden menu:
Turn on the ignition (not engine), then press and hold setup and turn the right knob clockwise/anticlockwise/clockwise to get into the hidden system menu.
2014-19 J11A-14 1.5dci Ink Blue Tekna owner; now departed for a Mazda CX-5 GT Sport Nav, 2.0L Petrol :D
Mrhappy1919
Posts: 4
Joined: Tue Oct 16, 2018 2:28 am
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by Mrhappy1919 »

Gel wrote: Tue Oct 16, 2018 7:11 am What needs recalibrating?
To access CONNECT hidden menu:
Turn on the ignition (not engine), then press and hold setup and turn the right knob clockwise/anticlockwise/clockwise to get into the hidden system menu.
i need to recalibrate the touchscreen because for exemple when i click 2 it clicked 1 in radio
chrisw99
Posts: 541
Joined: Mon Jul 11, 2016 10:42 am

Post by chrisw99 »

"Touch Display Calibration" is one of the hidden menu settings..



Look at 19 seconds in the video.
Oct 2014 N-tec+, 1.2 dig-T
Mrhappy1919
Posts: 4
Joined: Tue Oct 16, 2018 2:28 am
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by Mrhappy1919 »

chrisw99 wrote: Tue Oct 16, 2018 1:29 pm "Touch Display Calibration" is one of the hidden menu settings..



Look at 19 seconds in the video.
Thank you so much fixed :D
Mart80
Posts: 4
Joined: Sun Dec 22, 2019 10:03 am
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by Mart80 »

Sorry to jump onto an old thread, but when i try to calibrate my touchscreen i always get a calibration failed message, does anyone know why this might be the case? Thanks, Martin
Iandee
Posts: 66
Joined: Tue Feb 24, 2015 8:53 pm

Post by Iandee »

Without trying my screen in map mode suddenly started to recalibrate, eventually after going through a few messages, it said ‘system failure’. I took the sf card out and if still did it. Any one experience this ?
Ian Dee
1.2 petrol manual Acenta Premium Dig-T Reg May 2014, Magnetic Red. bought Feb 2015.
Post Reply