Tool for handling electronic parking brake

ICE, Equipment, Options
Post Reply
meken520
Posts: 2
Joined: Thu Nov 15, 2018 8:43 am
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by meken520 »

Hi,

I need to change the rear brake discs and pads pn my wifes qashqai 1,6dCi 2014. This car have the electrical parking brake. I need to back the piston using a epd-tool. I can’t find any information on what to buy.

I have only done this on audi and vw using vcds.

Can anyone help med finding one that will work?

Best regards.

DaveBerlin
Posts: 8623
Joined: Wed Mar 19, 2014 12:39 pm
Location: Berlin, Germany
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by DaveBerlin »

Meken, Sorry to have to mention this again but as a New member you can try to find information by just entering your needs in the “Search” Box Top LH Corner. Here are a couple I found which might hopefully help you - Dave 😉

viewtopic.php?f=28&t=6983&p=59951&hilit ... ads#p59951

viewtopic.php?f=28&t=3955&hilit=Rear+Br ... =40#p49503
11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken
meken520
Posts: 2
Joined: Thu Nov 15, 2018 8:43 am
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by meken520 »

DaveBerlin: I tried to search but I could not find any answer in the old threads, . Maybe i should have asked in one of the threads but they were specific for which tool handles EPB on Nissan QQ.

But feel free to erase the thread and i will move the question to one of the old ones.
Territorial_
Posts: 27
Joined: Wed Nov 14, 2018 8:39 am
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by Territorial_ »

No need for special tools, you can just remove motor from caliber. Then rotate shaft with torx. This will back up mechanism. Then you need to press pistons in like you do with manual setup.

Post Reply