The manual says not to use splitters in the 12v power sockets - is that 100% necessary?
If the things plugged in are low powered surely it would be ok?
For cosmetic reasons i'd like to plug in 2 dashcams to the hidden socket in the armrest and not have one visible in the socket beneath the Connect unit.
Is this safe or ill advised?
I don't want to hardwire anything either.
Thx, Phil
12v power socket splitter
- calnorth
- Posts: 2719
- Joined: Mon Feb 11, 2019 2:01 pm
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
The J11 repair manual states: (for each socket)
12v at 120W (10 amps and less). So that could run a small 12v fridge I'd say..not a Cig lighter though.
I suppose the danger of powerline splitting is that two different devices could inadvertently exceed 10Amps. Socket is fused at 20A or 15A depending on where in world? Two cameras shouldn't exceed 3A total but check camera docs.
Colin
12v at 120W (10 amps and less). So that could run a small 12v fridge I'd say..not a Cig lighter though.
I suppose the danger of powerline splitting is that two different devices could inadvertently exceed 10Amps. Socket is fused at 20A or 15A depending on where in world? Two cameras shouldn't exceed 3A total but check camera docs.
Colin
Mk2 Qashqai Facelift - J11b (2017–and onward)
1.6 Dig-T N-Connecta
1.6 Dig-T N-Connecta
-
- Posts: 770
- Joined: Sat Feb 04, 2017 11:34 am
- Location: South-East England
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
Thanks Colin, both are 1 amp rated so its looking safe to do.
Phil
Phil
2019 1.3 DiG-T 160 Tekna, black (J11b)
prev 2015 1.2 DiG-T n-tec+, black (J11)
prev 2009 1.5 dCi Acenta, black (J10)
prev 2015 1.2 DiG-T n-tec+, black (J11)
prev 2009 1.5 dCi Acenta, black (J10)
- calnorth
- Posts: 2719
- Joined: Mon Feb 11, 2019 2:01 pm
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
Its safe for the car but make sure your cabling is adequate. Assume they come with power cables etc?
If the camera has a battery in it try and keep it out of the direct sunlight (windscreen)....if poss?
In the camera software its a good idea to select the camera to record only when movement detected. Saves unnecessary processing and power use.
If the camera has a battery in it try and keep it out of the direct sunlight (windscreen)....if poss?
In the camera software its a good idea to select the camera to record only when movement detected. Saves unnecessary processing and power use.
Mk2 Qashqai Facelift - J11b (2017–and onward)
1.6 Dig-T N-Connecta
1.6 Dig-T N-Connecta
- gloucester
- Posts: 5173
- Joined: Sun Apr 03, 2016 7:04 am
- Location: Gloucestershire, England
- Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)
I used a splitter - no problem...
(2015 Nissan Qashqai Tekna DIG-T 1.2 sold 15/6/18) ~ 2018 Suzuki Ignis SZ5 - 2018 Yamaha MT-07 ~ (2024 Volvo EX30 ordered)
-
- Posts: 770
- Joined: Sat Feb 04, 2017 11:34 am
- Location: South-East England
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
Thanks both. We sold our 2nd car and so had a dashcam spare which is now going in the back via quite chunky cabling largely hidden from view. Neither had internal batteries and have performed well for a few years now. Better still, neither have been needed as such apart from catching the odd pillock doing something stupid.
2019 1.3 DiG-T 160 Tekna, black (J11b)
prev 2015 1.2 DiG-T n-tec+, black (J11)
prev 2009 1.5 dCi Acenta, black (J10)
prev 2015 1.2 DiG-T n-tec+, black (J11)
prev 2009 1.5 dCi Acenta, black (J10)