Upgrade SD satnav to non-SD satnav

ICE, Equipment, Options
Post Reply
incipient
Posts: 60
Joined: Sat Jul 04, 2020 11:02 am
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by incipient »

2014 or 2017 there are no different.
You need look your sistem. In your case it - radio with navigation.
Wires and connectors are the same between units from 2013 till 2018.
Differents are begins from 08.2019 with new head unit (witout sd card)

Willow5
Posts: 55
Joined: Tue Nov 27, 2018 7:47 am
Qashqai Model: Mk.1 Qashqai Facelift - J10b (2010–2013)

Post by Willow5 »

Thank you, just one more question. On the pinouts, are the pin numbers looking at the rear of the radio or at the front of the connector for orientation purposes? For example what is the meaning of this symbol?

Do you also have the pdf for 2018 onwards systems?

Screenshot_20200712-150952_Drive.jpg

incipient
Posts: 60
Joined: Sat Jul 04, 2020 11:02 am
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by incipient »

))

CollageMaker_20200712_172152380.jpg

Willow5
Posts: 55
Joined: Tue Nov 27, 2018 7:47 am
Qashqai Model: Mk.1 Qashqai Facelift - J10b (2010–2013)

Post by Willow5 »

Thank you! I cannot find M49 or M48 from the images below in the pdf file you sent for the older unit. Is it the right pdf?

20200711_214208.jpg

20200711_214238.jpg

incipient
Posts: 60
Joined: Sat Jul 04, 2020 11:02 am
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by incipient »

Your m49 is:

20200712_173950.jpg

incipient
Posts: 60
Joined: Sat Jul 04, 2020 11:02 am
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by incipient »

On pdf look pages obout navigation
Willow5
Posts: 55
Joined: Tue Nov 27, 2018 7:47 am
Qashqai Model: Mk.1 Qashqai Facelift - J10b (2010–2013)

Post by Willow5 »

Perfect thank you and just to confirm m48 is lower connection or could it be M10?
incipient
Posts: 60
Joined: Sat Jul 04, 2020 11:02 am
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by incipient »

M48 is lower connection in your old head unit
Willow5
Posts: 55
Joined: Tue Nov 27, 2018 7:47 am
Qashqai Model: Mk.1 Qashqai Facelift - J10b (2010–2013)

Post by Willow5 »

👍 I will try this week, please wish me luck! Also if CAN bus is a ring, can pin 31 and 38 be used interchangeably between M-CAN_H and M-CAN_H_TRM so can the wires be swapped around?
incipient
Posts: 60
Joined: Sat Jul 04, 2020 11:02 am
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by incipient »

Willow5 wrote: Sun Jul 12, 2020 4:08 pm 👍 I will try this week, please wish me luck! Also if CAN bus is a ring, can pin 31 and 38 be used interchangeably between M-CAN_H and M-CAN_H_TRM so can the wires be swapped around?
Yes. This one can system. But there are another's can systems in your car else. you can not mix them between ich ather. For example you can not mix can_h and v_can_h or its_can....
Good luck.
If you will have any questions, you can write here.
Post Reply