Upgrade SD satnav to non-SD satnav

[Omy]

Hi incipient, i've got the same new unit and hooking it up to my bench power supply, the screen does not work. I connected the pint 19 and 20 to 12v, i can see the power draw but nothing happends on the display. Is this expected and i need to wire additional ACC or ilumination, or is my unit faulty? Any pointers?

[incipient]

I shared schemes earlier. look for a signal from the ignition else

[Omy]

Got it working thanks.. still waiting on connectors from china.. this is going to take a while :/

[Cod]

I did it in april yet. If anyone have some questions, i will try to answer.
I bought radio without sd from qashqai 2019 and installed it in my x-trail 2019 ( was installed radio with sd)
https://www.drive2.ru/l/556353984240026452/

How did you know which model of the new head unit to get?

I've got a 2018 Tekna with bose, 360 cameras & Park assists.

I've seen 2 different types of the head unit, one has a 'P' next to the camera button and one doesn't

[incipient]

Camera+ "P" - with park assist
Camera (only) - without park assist

[Cod]

Camera+ "P" - with park assist
Camera (only) - without park assist

Thanks!

Where did you connect these 3 cables?

Vehicle Speed signal (M48 Pin 18)

HF/VR Mode Change (M187 Pin 51)

MR Output (M49 Pin 30)

[incipient]

guys, I'll be there soon. while fighting for freedom in my country! they turn off the Internet, I can't always read and write ...
Sorry. But now i don't remember where must be this 3 cables. Later I will write obout it...

[Ianharbron]

After months of waiting for a firmware upgrade and frustration with no voice control or CarPlay I’m going to try this route.

I’ve bought a 2019 head unit ready to fit.
How do I get a patch cable from a 2017 sat nav head unit to a new 2019 head unit.
Where do I look, anybody have the diagrams.
What do I need the dealer to do, what recording is required.

This has been done before by some brave and adventurous people. It seems the best way forward.

[calnorth]

After months of waiting for a firmware upgrade and frustration with no voice control or CarPlay I’m going to try this route.

I’ve bought a 2019 head unit ready to fit.
How do I get a patch cable from a 2017 sat nav head unit to a new 2019 head unit.
Where do I look, anybody have the diagrams.
What do I need the dealer to do, what recording is required.

This has been done before by some brave and adventurous people. It seems the best way forward.

Edit: Have I jumped the gun here?
Follow the link in this thread...last post by me with a vid by an Italian chap: (Nissan ICE is not the way to go)

viewtopic.php?f=20&t=9977&start=10#p78276

[Ianharbron]

I’d seen that thread and video but thought the system looked very ‘busy’ and slow to start.
Possibly a different theme or skin could improve the look.
I was hoping to stick with the Nissan hence the 2019 head unit.