Upgrade SD satnav to non-SD satnav
-
- Posts: 60
- Joined: Sat Jul 04, 2020 11:02 am
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
https://a.aliexpress.com/_B1CMAN
https://a.aliexpress.com/_BTLw8C
https://a.aliexpress.com/_BUCODU
https://a.aliexpress.com/_BU6b3G
This all connectors are necessary.
-
- Posts: 55
- Joined: Tue Nov 27, 2018 7:47 am
- Qashqai Model: Mk.1 Qashqai Facelift - J10b (2010–2013)
Thank you @incipient. I've noticed on the pinout for the new radio, there are the following CAN connections:
V-CAN_H
M-CAN_H
M-CAN_H_TRM
V-CAN_L
M-CAN_L
M-CAN_L_TRM
How do these pins match to the CAN bus connections on my old unit as I only have:
CAN-H
CAN-L
Thank you
V-CAN_H
M-CAN_H
M-CAN_H_TRM
V-CAN_L
M-CAN_L
M-CAN_L_TRM
How do these pins match to the CAN bus connections on my old unit as I only have:
CAN-H
CAN-L
Thank you
-
- Posts: 55
- Joined: Tue Nov 27, 2018 7:47 am
- Qashqai Model: Mk.1 Qashqai Facelift - J10b (2010–2013)
Thank you @incipient - how do you match the old identifiers to the new identifiers? It wasn't clear to me which is why I posted the question. Is this how you wired yours initially or was there some trial and error before you found the right pins?
-
- Posts: 60
- Joined: Sat Jul 04, 2020 11:02 am
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
I can read wiring diagrams. I studied this question for a long time and looked for information. I bought all the electrical circuits because no one wanted to share, because cars are too new. of course, at the beginning I was not sure that everything will work out, but everything worked out and there is a new head one in my car))) and I share my little experience with all))