as usually. By credit card..
Upgrade SD satnav to non-SD satnav
- gloucester
- Posts: 5196
- Joined: Sun Apr 03, 2016 7:04 am
- Location: Gloucestershire, England
- Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)
Welcome to this forum.
The answers to your questions are earlier in this topic and elsewhere in connected ones.
However please note that there is absolutely no comparison between "Nissan Connect" - which was frankly useless - and "Android Auto".
The answers to your questions are earlier in this topic and elsewhere in connected ones.
However please note that there is absolutely no comparison between "Nissan Connect" - which was frankly useless - and "Android Auto".
(2015 Nissan Qashqai Tekna DIG-T 1.2 sold 15/6/18) ~ 2018 Suzuki Ignis SZ5 - 2018 Yamaha MT-07 ~ (2024 Volvo EX30 ordered)
-
- Posts: 55
- Joined: Tue Nov 27, 2018 7:47 am
- Qashqai Model: Mk.1 Qashqai Facelift - J10b (2010–2013)
Hi @incipient I can also read wiring diagrams but didn't understand how the old labels match the new ones. Since there are 2 x CAN-H on the old unit I assumed the connections were identical so how did you differentiate between these for example? How does 1 CAN-H feed both M-CAN_H and M-CAN_H_TRM
-
- Posts: 60
- Joined: Sat Jul 04, 2020 11:02 am
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
It is easy. But, it necessary to understand principle of operation of CAN. At this case not important, how you do it. Becouse can system like a ring of wires. Signals will be correctly work inside ring.
Sorry, my level of english is poor((
Sorry, my level of english is poor((
-
- Posts: 55
- Joined: Tue Nov 27, 2018 7:47 am
- Qashqai Model: Mk.1 Qashqai Facelift - J10b (2010–2013)
Which wiring diagram do these correspond to ? They are out of the 2014 Qashqai so part number: 7 513 750 231 and 259154ET3A
Looks like this connector is PBT-GF30 but I cannot find this in the PDF file you previously attached
Looks like this connector is PBT-GF30 but I cannot find this in the PDF file you previously attached
-
- Posts: 60
- Joined: Sat Jul 04, 2020 11:02 am
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
If you look on foto with my adapter with attention, you will see, that both ones need any modifications.
For example Pin "auto acc"(7) from this connector of old head unit need to switch to (44) to big upper connector of new head unit.
For example Pin "auto acc"(7) from this connector of old head unit need to switch to (44) to big upper connector of new head unit.